怎么ping网速ping命令简单测试网速方法详解

　　怎么ping网速?
　　Ping 在Windows系下是自带的一个可执行命令。利用它可以检查网络是否能够连通，用好它可以很好地帮助我们分析判定网络故障。应用格式：Ping IP地址。该命令还可以加许多参数使用，具体是键入Ping按回车即可看到详细说明。
　　下面，本文就教你用ping命令简单测试网速。
　　命令格式：
　　ping ip地址 -l 字节数
　　注：上面的命令中 l 是字母l,不是数字1
　　网速等于≈(发送的字节数/返回的时间[毫秒])K字节
　　以上计算的结果速为字节(byte)，不是我们通常说的位(bps)
　　如：
　　C:\Documents and Settings\Administrator>ping 202.101.224.68 -l 1000
　　Pinging 202.101.224.68 with 1000 bytes of data:
　　Reply from 202.101.224.68: bytes=1000 time=38ms TTL=251
　　Reply from 202.101.224.68: bytes=1000 time=38ms TTL=251
　　Reply from 202.101.224.68: bytes=1000 time=38ms TTL=251
　　Reply from 202.101.224.68: bytes=1000 time=38ms TTL=251
　　Ping statistics for 202.101.224.68:
　　Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
　　Approximate round trip times in milli-seconds:
　　Minimum = 38ms, Maximum = 38ms, Average = 38ms
　　根据上述发送及返回的信息可以简单得出到地址202.101.224.68的网速为：b3hN_M[9I|&!s
　　网速等于≈(发送的字节数/返回的时间[毫秒])K字节
　　≈1000/38K字节
　　≈26.32K字节
　　附：ping命令帮助说明
　　C:\Documents and Settings\Administrator>ping /?
　　Usage: ping [-t] [-a] [-n count] [-l size] [-f] [-i TTL] [-v TOS]
　　[-r count] [-s count] [[-j host-list] | [-k host-list]]
　　[-w timeout] [-R] [-S srcaddr] [-4] [-6] target_name
　　Options:
　　-t Ping the specified host until stopped.
　　To see statistics and continue - type Control-Break;
　　To stop - type Control-C.
　　-a Resolve addresses to hostnames.
　　-n count Number of echo requests to send.
　　-l size Send buffer size.
　　-f Set Don''''t Fragment flag in packet (IPv4-only).
　　-i TTL Time To Live.
　　-v TOS Type Of Service (IPv4-only).
　　-r count Record route for count hops (IPv4-only).
　　-s count Timestamp for count hops (IPv4-only).
　　-j host-list Loose source route along host-list (IPv4-only).
　　-k host-list Strict source route along host-list (IPv4-only).
　　-w timeout Timeout in milliseconds to wait for each reply.
　　-R Trace round-trip path (IPv6-only).
　　-S srcaddr Source address to use (IPv6-only).
　　-4 Force using IPv4.
　　-6 Force using IPv6.
　　C:\Documents and Settings\Administrator>