bedplate造句
1. The bedplate is the foundation of the engine.
2. The bedplate , which in most cases is of the welded design , is bolted to the seating which Forms a part of double of the ship.
3. He pats bedplate, bite sound to stop namely, but differ meeting is bitten again rise.
4. Car bedplate inward and mobile reaches the specified position to stop moving , vehicle deposit operation finishes.
5. Combination of one printing head to three bedplate could improve be used all-purpose with little chromatically.
6. In the construction of CCTV main building bedplate, the shape steel brackets are used as supports for upper steel reinforcement according to some special characteristics of the bedplate.
7. This is the engine bedplate casting ex foundry and the bearing housing blocks.
8. Now bedplate and crankshaft have been delivered to the vessel and two engine manufacturer's representatives were, as of 25/10, carrying out the engine rebuild.
9. In order to ensure the accurate alignment of the gear reducer, grind and remove the imprint marks unintentionally left on the gear reducer surface and foundation bedplate surface.
10. The gear reducer is aligned based on 4 mark lines on sides of bottom flange and bedplate marks.
11. A few days later, the professor found the body of his best friend whose face was facing down was stapling under the bedplate.
12. The ground and top layer used unbleached wooden floor board, stone element also was implied in the bedplate of the pool that wash a face.
13. In order to prevent corrosion of gear reducer surface and bedplate surface occurring during operation after installation, apply a uniform thin film of MoS2 lubricating grease to bedplate surface.
14. The defective bearing bushes should be turned out of the bedplate and renewed.
15. For instance, when choosing a bed to provide, they will be advertent the distance of bedplate and ground, the soft strong pitch of mattess.
16. The screwrotates the nut to drive the lower end of a seesaw to move, thus hoisting the bedplate at the bedside section and bending up the upper body of the patient.
17. The utility model can be driven to move along straight line by two parallel guide rods which are fixed on the bedplate.
18. A rail-pad type sensor is arranged on a sensor bedplate and is provided with a B-shaped fastener.
19. And there are any metallic connectives on this bed, joggle is between bed leg and bedplate, craftsman certains ably good mortise, this bed combination is together.
20. The bed of old people adds thick mattress with hard mattess or hard bedplate had better.