creepage造句
1. Check any break or creepage on wires before use.
2. Lateral - creepage corrugations are found most often in curves and on treads where the wheelsets are mis - aligned.
3. SWL 500 is a creepage - type electric fire monitoring system solution scheme.
4. Creepage distance is an important test item of safety test and international proficiency test.
5. Creepage Distance - Shortest path between two conductive parts, or between a conductive parts and the BUNDING SURFACE of the equipment, measured along the surface of the insulation.
6. Check whether there is any break or creepage on wires before use.
7. This paper states that using creepage and turnoff implement should pay attention to its usage environment and action electricity and separation time.
8. Uncleanly high-voltage tie-in will make startup failure for creepage. High-voltage line should be moored after installation, avoid rubbing with metal nearby.
9. The determination method of electrical clearance and creepage distance is expounded, and the testing and demonstration method is described.
10. Once the force generating the creepage is spent by the sliding 'action, the stick-slip process begins again (Figure 1).
11. The total creepage distance of an insulator shall be not less creepage distance requested by the pollution level for the site.
12. AC flashover voltage, voltage gradient along the leakage distance and the valid creepage distance of polluted insulators are related to its materials and configuration.
13. The machine should be grounded parts the electrical wire should be insulated and installed in the snakeskin annultions. Check out whether the motor is abrasion or creepage.
14. This papers states how to select electric - shock protector under the circumstances of direct protection, indirect protection and normal creepage of electric equipment.
15. It insulates heat by air. The low temperature of furnace body, confect creepage safeguard equipment , makes sure security.
16. The double-umbrella insulator has the advantages of improving the pollution-resistance performance of the insulator and increasing the creepage distance.
17. Although the AC flashover performance of a polluted insulator has been studied well, there is few study on the valid coefficient of creepage distance of different types of insulators.
18. Calculation and numerical analysis from programming educesaccurate measurement of creepage distance in complicated structure, thereby strengthening the proficiency test ability.
19. A new viewpoint on the selection of the specific creepage distance is put forward and the merits and disadvantages of the line lightning arrester are analyzed.
20. But since independently rotating wheels have no turning moment resulting from longitudinal creepage, independently rotating wheels lack guiding ability and can but basically depend on flange to guide.