pressure plate造句
1. Diaphragm spring pressure plate assemblies are widely used in most modern cars.
2. The retracting spring pulls the pressure plate away from clutch plate thus disengaging clutch.
3. Another pressure plate motion mechanism is shown in Figure 3.
4. Selection will affect the pressure plate and tapes of adhesion between material pressure plate.
5. Most users are using thin glass plate or pressure plate approach.
6. The two primary types of pressure plate assemblies are coil spring assembly and diaphragm spring.
7. The solution is to reduce water roller and pressure plate.
8. Diaphragm spring pressure plate assemblies are widely used in modern cars.
9. The retracting spring pulls the pressure plate away from the clutch plate thus disengaging the clutch.
10. To help the operator to facilitate memory, instructions can be pressure plate (outer ring fixed disk) in the red arrow aimed at the weight value.
11. The clutch disc fits between the flywheel and the pressure plate.
12. It may be necessary to lightly tap the cast webs and the pressure plate to loosen.
13. Metal production and business cycle, such as car manufacturers also face selling pressure plate.
14. ADVANTAGE plate heat exchangers consist of a number of stainless steel transfer plates that are held in place between a fixed plate and a movable pressure plate to form a complete unit.
15. To replace relief valve disc, hold the upper guide fin and unscrew the diaphragm pressure plate.
16. And then adjust the cone so that rely on version with water roller pressure plate.
17. A professional supplier of spare parts for European heavy-duty vehicles. Dominant products are clutch release bearing, pressure plate, clutch disc and their components.
18. Maintenance costs of about I give you a reference, repair the power board and the pressure plate is 60 or so, for the lamp is 90 or so.
19. The release bearing fits between the clutch fork and the pressure plate assembly.
20. The movable device mainly consists of the nut, bolt, lifting wedge, backseat, supporting seat of the clamp plate, spring and pressure plate and so on.
21. Loosen and remove the diaphragm lock nut and lock washer, pressure plate and diaphragm from the valve stem.