plane section造句
1. Under the assumption of plane section, the 3D displacement field equation is discretized in terms of nodal displacements.
2. For NC machining of plane section method, the machining path of tool cutting plane and implicit surface can be found, and the curve of the tool path is drawn by the positive-negative method.
3. A plane section of a surface of revolution containing the axis of revolution.
3.try its best to collect and create good sentences.
4. Based on plane section computational assumption, the constraint equations of element nodes' degree are used and the simplified finite element method is proposed.
5. With theoretical method based on the assumption of plane section, the influence of steel reinforcement ratio, CFRP amount and initial loading level on the flexural strength is analyzed.
6. Following the process of construction, considering the worst loads, according to the assumption of plane section, the steel girder alone and the composite girder are computed respectively.
7. The computation of stress resulted by external load is relatively complex because the deformation of unbonded prestressed strand cannot comply with the plane section assumption.
8. The strain measurement proves that the average strains agree with the assumption of plane section.
9. During the beam of recycled aggregate concrete being under the load, the changes of the normal section's stain were complied with the assumption of plane section.
10. As to bonded concrete beams, complete bond between steel and concrete is always assumed, so analysis can be performed based on plane section hypothesis.
11. The calculation of flexural strength of reinforced concrete members in Code for Design of Concrete Structures (GB50010-2002) is the equivalent rectangle method based on the plane section assumption.
12. Lately the work on hand is modelling pituitary in 3D, here's a vertical plane section view.
13. A method to calculate the section curvature ductility index of high strength concrete shear wall is induced by using stress-strain relationship of rectangle stirrup and plane section assumption.
14. Another method for calculating ultimate flexural capacity is presented which base on plane section assumption, and the reduced coefficient caused by slip is given.
15. According to performance of carbon fiber and its application in engineering strengthening, the formula of plane section strength and shear strength of flexural members are put forward.
16. In related pilot study, more cross-section of the reinforcement has been researched, but it has few study in strengthen diagonal plane section.
17. The flexural strength calculated on the basis of the plane section assumption and strain compatibility condition agrees well with the test results.