peak to peak造句
1. Can measure the input signal frequency, amplitude, peak to peak, and RMS.
2. CONCLUSION Peak to peak can be used as prodrug of ? ? glucuronidase for ADEPT.
3. Result: In self-comfortable walking speed, the peak to peak amplitude of the vertical GRF increased with shoe heel height increasing.
4. The peak to peak amplitude of forward GRF with media-heel shoe was minimal.
5. In the mountains the shortest route is from peak to peak but for that you must have long legs.
6. A business cycle can be measured from peak to peak or from trough to trough.
7. The peak to peak values and effective values COM equations are introduced in this paper and the expressions of the peak to peak values P matrix and the effective values P matrix are also given.
8. The peak to peak values P matrix and the effective values P matrix are used to simulate the frequency responses of the LCRF structure and IEF structure SAW filters.
9. With the matching unit, the influences of the applied peak to peak voltage and driving frequency to the transmit current, the discharge power and the homogenous discharge area have been investigated.
10. Pixel clock output frequencies range from 10MHz to 140MHz with sampling clock jitter of 250ps peak to peak.
11. With the fact that the Doha round is at a deadlock, the step of economic globalization step slows down to some extent, the tide of economic regionalization moves from peak to peak.
12. It can determine the normal axis voltage by analyzing peak to peak and frequency characteristics of the axial voltage.
13. The measuring vibrating signal method may be used on real time, mean while, vibrating signal can be measured by peak to peak value or true virtual value .
14. Orogeny to the surrounding peaks and categorically separate, when weather, standing Gongga Peak to Peak to see the golden light refraction, the distance could see smoke rising wave.
15. These variables are carrier frequency off-set value, pre-emphasis factor, weighting factor, video spectral distribution and nominal peak to peak frequency deviation.
16. We built the above amplifier signal to improve the peak to peak audio signal.
17. Pulsation dampeners shall be supplied at inlet, and outlet, to meet API 618 requirements for 2% peak to peak pulsation at customer flange.