piston skirt造句
(1) Finally, it introduces the micro-shape of piston skirt.
(2) Force acting at piston skirt from hydrodynamic fluid film and moment about piston pin were obtained from Reynolds equation of hydrodynamic lubrication.
(3) Finally, the optimum piston skirt profile of 135 diesel engine is made as an example.
(4) In order to get the complex surface of piston skirt with barreled profile and varying ovality, a kind of arithmetic which can simply get a cubic curve was given.
(5) The worn - out guide ring of the piston skirt should be renewed.
(6) In this paper, a grinding experiment on a piston skirt profile coated with compound material in a high-power locomotive diesel engine is carried out under a rating condition.
(7) A method of applying the coating to the piston skirt is also disclosed.
(8) The paper mainly introduces the calculating equation for piston skirt molded lines, the drawing of piston, and the design for convexity mother plate molded lines.
(9) The control rule based upon the self-optimalizingsearch method makes the system turn the complex surface of some kind of piston skirt successfully.
(10) When the piston reaches the top dead center, the temperature of oil film decreases from the top part of piston skirt to the bottom part of piston skirt.
(11) One reason for the slipper piston is that, on the short-stroke, over square engine, the piston skirt had to be cut away to make room for the counterweights on the crankshaft.
(12) By the iterative method, the influence of cylinder vibration on piston skirt lubrication is investigated.
(13) Therefore, it is of great significance to research on the piston skirt profile design and to find an advanced reasonable piston skirt surface design method.
(14) The theoretical basis and calculating methods are presented for the design of oval piston skirt of SL105 eerie, diesel engine.
(15) Metallic detergent and ashless dispersant additive system provides superior control of ring belt and piston skirt deposits, even under the most severe operating conditions.
(16) Based on a thorough study of moulding plane of piston skirt of HS-700 type gasoline engine, the design of variety ellipse section is made.
(17) Based on the character of the middle-convex and varying ellipse piston with complex transverse and longitudinal section contour, a method using MATLAB to fit piston skirt curve is given in this paper.
(18) The fracture reasons of connecting bolt of piston head and piston skirt in a diesel engine for ship were analyzed by OM, SEM and EDS etc.
(19) Currently, there is no clear theoretical basis and effective means for piston skirt surface design which influenced by cylinder matching gap and thermal-deformation and so on factors.