density ratio造句
1. Higher density ratio could generate larger film cooling coverage.
2. If dark energy density decreased over time, the acceleration rate of universal expansion would decline and potentially cease if the pressure/density ratio reached -1/3.
3. The effect of density ratio on suction surface and leading edge is more evident.
4. The influence of density ratio on the characteristic frequency of coherent structure on the centreline of low Re number free round jet flow has been investigated with Dual PDA.
5. In this simulation. the density ratio of beam electron and background electron is 0.125.
6. The effect of the density ratio has also been considered.
7. At a pressure/density ratio of just -1.5, this scenario could unfold over a mere 22 billion years.
8. We suggest that better control effect of the lady beetles on cotton aphids might be gaind by regulating their density ratio.
9. The results show that the friction loss coefficient is the key factor affecting the efficiency of pump. The density ratio has a moderate effect on the property of jet pump.
10. A critical point corresponding to the Flow number 1.8 was firstly observed in process of investigating influence of solid-gas density ratio to fluidized behaviors.
11. Based on the GVC scheme, a numerical solver was constructed to simulate two-dimensional interface problems of high pressure and density ratio.
11. Wish you can benefit fromand make progress everyday!
12. The effects of parameters such as the gas compressibility, the liquid viscosity, surface tension, density ratio , and velocity ratio, have been considered.
13. In this paper, based on the random characteristic analysis of Tianjin Hospital Earthquake waves of Tangshan aftershock Three dimension acceleration power spectral density ratio have been presented.
14. The optimum mutual interference power density to receiver noise power density ratio for the maximum ...
15. The optimum mutual interference power density to receiver noise power density ratio for ...
16. The calculating results show that the circulating flow rates are increasing with the submergence ratio but reducing with the liquid-gas density ratio.
17. The treatment can be used to describe the effect of cross angle and density ratio on the axial velocity decay in fully developed jet flow.
18. Parametric studies show that the axial elastic modulus of the composites increases with increasing the linear density ratio of axial yarn to braider yarns and pitch length.
19. The equivalent velocity agrees well with experimental data. This method can be used to describe the effect of angle of cross jets and density ratio on axis velocity of fully developed jet flow.
20. Volume is also fundamental to quality assurance, as the size of the software product is the denominator for the defect density ratio.