快好知 kuaihz


gas cooled reactor造句
1) In 1965 the first advanced gas cooled reactor, Dungeness B, was ordered. 2) The thickness of coatings for the HTGR(high temperature gas cooled reactor)coated fuel particles must meet design requirements. 3) Analysis shows that using modular high temperature gas cooled reactor (MHTGR) to realize nuclear combined heat and power (CHP) is the best way for nuclear heating. 4) The 10 MW high temperature gas cooled reactor (HTR 10) reached critical in the end of 2000 in China. 5) The high temperature gas cooled reactor (HTGR) coupled with the gas turbine cycle is considered as one of the leading candidate concepts for future nuclear power deployment. 6) The paper presents the thermocouple penetration assemblies of 10MW high temperature gas cooled reactor(HTR- 10). 7) Coated fuel particles are the kernel of spherical fuel elements in the 10MW high temperature gas cooled reactor (HTR10). 8) The basic principle and the implement method of bi directional detector for fuel handling system in 10MW high temperature gas cooled reactor were studied in this paper. 9) A correlation for predicting critical steam quality is derived, it can be recommended to be used for the design of steam generator of High Temperature Gas Cooled Reactor(HTGR). 10) In order to ensure spherical fuel elements to transport reliably in 10MW high temperature gas cooled reactor (HTR-10),[http:///gas cooled reactor.html] the method of pneumatic post is utilized. 11) This paper introduces a design of digital neutron flux monitoring system for 10MW high temperature gas cooled reactor and its performances. 12) A data measuring and acquiring system was designed on the basis of the theoretical analysis of the steam generator's stability for 10MW high temperature gas cooled reactor. 13) This paper briefly introduces the system design and software development for the cost control system of the 10MW high temperature gas cooled reactor (HTR 10) project. 14) A new friction rotating method which can find the location of all flaws is presented and is used on 10MW High Temperature Gas Cooled Reactor(HTR 10). 15) A new kind of sol - gel process for preparation of dense UO2 kernels used for HTGR (High Temperature Gas cooled Reactor) has been developed in our institute. 16) Analysis of the basic single loops of 10MW high temperature gas cooled reactor (HTR 10) is needed to improve its coordinate control strategy. 17) PANAMA program is developed for safety analysis of high temperature gas cooled reactor. It can be used to calculate the failure rate of TRISO coated fuel particles under accident conditions. 18) The essential principle and implementation of the bi directional detector for Fuel Handling System (FHS) in 10MW High Temperature gas cooled Reactor (HTR 10) are presented. 19) The fuel particle coating is a key technology for the 10MW high temperature gas cooled reactor (HTR 10). 20) The coated fuel particle is the key fuel element in the high temperature gas cooled reactor (HTGR).