electroforming造句
1. As a new fabrication technology , micro electroforming i.
2. The electroforming of Ni-Mn alloy for the thin-wall revolving part was carried out with a device that could be used to electroform a revolving part.
3. Nickel electroforming is an important procedure of holographic anti counterfeiting.
4. Similarly, the smooth aperture walls produced by electroforming also enhance paste release.
5. Electroforming characteristic: precision and finish high, durable, will not be rust, product diversification on request.
6. Features of Electroforming products: High polishing, high curacy , hard and durable, rust never...
7. Finally, the performance of the electroforming nickel layer accords with our use requirements using the optimum process parameters to electroform nickel in a model ship.
8. For applications with pitches below 0.5 mm, choices are limited to laser cutting or electroforming.
9. On the basis of Nickel mould plate fabricated by melting photoresist and electroforming PMMA cylindrical microlens arrays are fabricated by the replication technology of static casting plastic.
10. The rudiments of microneedle actuator have been developed, which is mainly made of SU 8 photoresist, and its 3D construction is fabricated by multistep exposal and electroforming metal.
11. DEM technique is a three - dimensional micro fabrication technique including three steps : deep etching, electroforming and microreplication.
12. Stencil manufacturing techniques include chemical etching, laser cutting and electroforming.
13. As to the rapid piece of prototype, we adopted new technology to let it become an electric conductive body firstly and then fabricate the mould with the method of pulse electroforming.
14. Adopting the riblet structure of sharkskin as a templet, two ways of micro-replication, replicated moulding and electroforming, were used to replicate the microstructure on the surface of a polymer.
15. This article mainly explains the process of LIGA technology, which includes X - ray lithography, - electroforming and - copy.
16. Manufactured AZ photo-resist model of microlens array by hot-melt method and used them as electroforming mother type to carry out the electrotyping forming of their mould cavity.
17. SEM and EDS were the examination of surface morphology and the component of nano - composite electroforming deposits.