swarf造句
1. Swarf from lathes lay thick on the floor below.
2. Swarf smiled in triumph, letting the body fall on to the ground.
3. Swarf looked pleased and hobbled around the courtyard, laughing to himself.
4. It looks like the same sort of swarf that's lying under Orrie's bench.
5. Not available for Swarf milling From Surface Isolines.
6. For swarf cutting, the user selects the top and bottom curves to machine, and a check (or limit) surface.
7. By using fluorite, swarf and others for inoculanting the nodular iron the nodule count in inoculated iron increased obviously, even by over 100% more than that the iron without inoculation.
8. The metal swarf is stripped from the drum by adjustable scrapers and forced off the end of a discharge chute.
9. The method for quantitatively describing carrying and classification of swarf is presented.
10. Ultrasonic cleaning is a good fit for a wide range of applications, from removing swarf and grinding and polishing residue to treating parts covered in oil, grease, or layers of paint.
11. The fourth seat Thomas Berdych of the Czech Republic swarf Germany's Nicholas Kiefer in straight set, and there were also straight forward wins for Micheal Youzhny and Marcos Baghdatis.
12. The linear guide ways have no contact with grinding swarf which drops to the bottom of the machine for transfer to the sump.
13. The new work supports are protected against penetration of swarf by a metallic wiper edge and sealed against liquids.
14. About one third of the consumed energy was due to the interaction of the swarf with the applied fluid and bond matrix, while the remaining energy was attributed to ductile plowing.
15. With the grinding going on, electroplated bond was gradually worn out, and color of glass swarf changed from white to black.
16. The theory of hydraulic vibratory cutting was applied to cut swarf into shorter ones in machine cutting automation line.
17. Applicable for 5-Axis Cut Line Surface and Trajectory milling, and for Swarf milling.
18. Integral standard features also include an enclosed work area with a 600 CFM mist collection unit and a 40 gal recirculating coolant system with self cycling paper element swarf filtration.
19. Threads and profiles are stronger, consistently accurate and there is no swarf.