processability造句
1. In addition, the processability of the composite materials with maleimide resin as matrix could be improved apparently.
2. Processability, foams structure and dynamic property of LDPE foams are changed due to ESI addition, and shows different changing tendency along with different styrene monomer content in ESI copolymer.
3. The processability of the plastic bottle cap for shampoo was analyzed.
4. The processability of uncured EPDM would be improved by decreasing process frequency, increasing strain or temperature.
5. The processability of the grafted PP with different MFR had different decrease.
6. The structural processability of the press button decorative cap on an automotive header board was analyzed .
7. Through the experiment, the differences of the processability and the physical properties of the elastomer based on three different diamine chain-extender were compared.
8. The tensile strength, heat resistance and processability of the system decrease slightly with the increase of superfine wollastonite amount.
9. Processability of vinylidene chloride(VDC) vinyl chloride(VC) suspension copolymer was investigated, including its rheological behavior and thermal stability.
10. Influences of filler content on processability, mechan i cal properties and cost of low - ratio foamed unplastized poly(vinyl chloride) (PV C) board were discussed.
11. The butene-1 (co)polymers show a good balance between processability and elastomeric behavior.
12. The mechanical property, thermal property and processability of wood plastic composite by injection mold are studied.
13. The processability and thermal stability of propargyl Novolac resins(PN resins) were studied, and the evaluation of PN resins as matrices for silica laminate composites were also presented.
14. The straightness of the bar shall guarantee a prefect processability .
15. The results indicate that melt stability only shows material's processability while antioxidants are added alone, no showing that it keeps heat resistance in long run test.
16. The results showed that POE was superior to EPDM on processability and toughening effect.
17. Influence of IFR on behavior of carbonization, microstructure, flame resistance, mechanical properties and processability of ABS composites were studied.
18. The recycled PET composite had good mechanical properties, better processability and shorter processing cycle.
19. Silane A 151, fatty acid Ste - Zn , titanate JN 201 had better surface treating effects, resulted in better rheological behavior and processability.
20. The particles or fibers can reduce a friction coefficient of the portion of the tubular member while having minimal to no adverse effects with respect to bondability, flexibility, and processability.
21. The precure process makes the resin cure to a certain extent, decreases resin flowability, improves resin processability significantly, and enhances the composite laminates quality.
22. The results showed that CZ-601 was comparable to and could replace the imported product of the same kind in processability and heat stability.
23. Epoxy resin is a thermosetting resin with some good features including electrical properties, chemical stability, adhesive, processability and so on.
24. The results showed that the flame-retardant color masterbatch has only not excellent flame-retardant property but also good heat stability,[http://] processability and coloring property.
25. ABS offers a balance of strength toughness high gloss processability non - toxicity high dimensional accuracy and stability.
26. Sometimes the more linear cold rubbers are slightly crosslinked by the incorporation of about 1% divinyl benzene to improve processability and compression set resistance.
27. It is widely recognized that , in such cases, the particle diameter of rubber (PB latex or SBR latex) greatly governs the impact resistance and processability of the final products.
28. Macromolecular colorants have advantage in high strength, resistance to solvents and processability compared with monomolecular colorants, thus can be widely used in many fields.