magnetic core造句
1. Magnetic Core Memory was developed.
2. The magnetic core Rogowski Current Coil should reduce inner resistance as far as possible.
3. Conclusions as the criteria of magnetic core saturation and reset effects of reverse current to magnetic core were drawn from the experiment results.
4. The sensor is made up of original circuit, magnetic core, Hall part, secondary coil and magnifier. There are two work modes: direct measure mode and closed-loop mode.
5. An open-ended magnetic core with alternating current coils was laid on the flange surface to come a closed magnetic circuit .
6. Magnetic core. Single or double line representation can be specified.
7. Magnetic core. Right - click for single or double line representation.
8. The magnetic core consists of imported oriental crystal laminations with a very low loss factor.
9. Working principle of magnetic core in linear transformer driver(LTD) was introduced. The influence of the magnetic core's volt-second product on the output of LTD was deduced by means of simulation.
10. The circuit in the sensor can track the variation of magnetizing current and compensate it automatically to assure the magnetic core working in "zero flux" condition.
11. An opening in a data medium or device such as a card or magnetic core.
12. SMD beads , check folder filter, common mode, different mode filters, transformers, magnetic core, such as a full range of passive component products.
13. Case for the H58 wrought copper or PCS manufactured by NdFeB magnetic core, magnetic sensor switch for imports of power components.
14. This paper describes computer-aided design of a sense amplifier circuit in a magnetic core memory. The sense amplifier circuit has been modified by analyzing its threshold characteristic.
15. This is the electrical resistance per unit length and cross - sectional area of a magnetic core.
16. In this case, the coupling coefficient of the transformer with magnetic core is up to 0.88. Compared with air-core transformer of the same size, its coupling coefficient increases 10%.
17. The invention provides a copper mould suction casting preparation device of an iron-based bulk amorphous alloy toroidal magnetic core and a method therefore.
18. A series of experiments were designed to evaluate the saturation of the magnetic core.
19. The present paper introduces a programmable ROM, which is used in a 5spindles (numerically controlled) engraving machine, with E-type magnetic core as storage element.
20. The high frequency transformer is designed by the AP method. The type of magnetic core, wire guage and the coiling method are computed by the AP method.
21. The transformer in this converter needs no magnetic flux reset coil and has high utilization factor of the magnetic core.
22. So far the high grade mullite-corundum core frame for burning materials for deflection magnetic core have not been developed because the research on this subject state late in China.