快好知 kuaihz


superplasticity造句
1. The recent development of researches on superplasticity of ultrahigh carbon steels (UHCS) is reviewed. 2. It was showed that the superplasticity of materials are closely related to its microstructure. 3. In higher strain-rate condition, LY12 alloy has good superplasticity and room temperature properties. 4. The relation among the microstructure, superplasticity and deformation system are researched, thus offering guidance for designing or adjusting production process. 5. The coarse crystalline LC4 alloy exhibit some superplasticity under lower temperature and higher strain rate, because it can create effective recrystallization refinement. 6. The superplasticity research was carried out under constant temperature compression deformation for salt-bath cyclic quenched and high frequency hardened T10A steel. 7. Usually, excellent Superplasticity of Zn-Al eutectoid alloy could be obtained by pre-deformation (rolling or forging). 8. Superplasticity in intermetallics has been researched in the past decade. 9. The quasi - superplasticity of as - cast lead brass was studied by monodirectional elongation experiment. 10. It is now recognized that superplasticity is a potential deformation process in ceramics. 11. Coarse crystalline LC4 Aluminium Alloy presents certain superplasticity at lower deformation temperature and higher strain rate because it can create effective recrystallize refinement. 12. Through two methods of pretreatment,[/superplasticity.html] the industrial superhigh strength aluminium alloy LC9 showed good superplasticity in certain range of temperature and strain rate. 13. After treatment in this way, the aluminium alloy bars present a good superplasticity. 14. The results showed that the spray formed UHCS not only has an excellent microstructure, as compared to the as-cast microstructure of conventional UHCS, but also has an unique superplasticity. 15. It is indicated that as - cast leaded brass without pretreatment can present certain superplasticity at proper condition. 16. The results show that coarse crystalline LC4 Aluminium Alloy can present certain superplasticity at proper deformation temperature and velocity. 17. The supercooled liquid phase welding is successful due to the thermally stable supercooled liquid state of the bulk metallic glasses and the superplasticity and viscous flow of the supercooled liquid. 18. And discuss influence of hydraulic press loading in change speed rate pattern and superplasticity forging on parameters. 19. The spray formed ultra high carbon steel (UHCS) was firstly produced in the world and study has been made on its superplasticity and properties after hot working. 20. The experiment results show that Al-matrix composites appear better superplasticity in IHIE state.