unit load造句
(1) The simulation of 125 MW unit load system proved that the new method had satisfactory performance.
(2) Steel base unit load capacity : 500 lbs, per linear foot.
(3) This is because the circumferential unit load at the pallet seating surface is directly proportional to the diameter of the seating area.
(4) The concepts of load, unit load and loading factor are introduced.
(5) Each logic family has a " unit load expressed in milliamperes. "
(6) The unit load system is a two-input and two-output multivariable plant with coupling and inertia.
(7) Similarly, varying load conditions, as the unit load required to respond as quickly as possible, to stress the extent permitted margin shorten response time.
(8) Unit load system of power plant is a double-input and double-output multivariable system with big inertia. The conventional control method can't get satisfactory result.
(9) With the improvement of unit load and parameters of the power plant, coal-fired power plant uses medium speed mill direct-firing pulverizing system in common.
(10) With the improvement of unit load and parameters of the thermal power plant, and also with the complicating of thermal equipments, automatic control systems are required more and more efficient.
(11) Optimize the distribution of thermal power unit load and optimize power generation scheduling is important to realize energy saving development and significant to energy-saving.
(12) The unit load method is a simple, easy and practical calculating method which differs from the complicated traditional ones.
(13) It is helpful to understand more deeply the contents associated with the statically indeterminate structure, and know better the application of the unit load method.
(14) The longitudinal displacement of pier top caused by temperature difference between one side and another side of pier is calculated by unit load method.
(15) A new coordinated control model based on the energy balance between the value of radiative energy signal and the unit load is established, to improve the unit load control.
(16) The way of identifying the ability equipment are fixed unit load and guarantee value of product catalog.
(17) While the controller is applied to controlling system about unit load of boiler, adaptive control of nonlinear big-lagged system is realized.
(18) Finally, this study analysised the asphalt mixture fatigue damage evolution process of stress control mode and established a relationship between unit load fatigue damage rate and the fatigue life.
(19) The complex method is applied to the optimum design in which the total power loss per unit load capacity is regarded as an objective function.
(20) According to the valve switching principle, the switching time was prolonged to decrease the unit load hunting.