cooling capacity造句
1) Cooling capacity 50 kg dough per single rack.
2) The factors affecting the cooling capacity analyzed The performance of evaporator and absorber analyzed with emphasis.
3) With increasing of nitrogen pressure, the cooling capacity of nitrogen, the cooling velocity and hardness of the workpieces after quenching are improved.
4) Nominal cooling capacity conditions : chilled water in 12℃, out 7℃; entering air DB 35℃ , WB 24℃.
5) The results show that cooling capacity of the unit drops dramatically as the supply water temperature rises, and also drops as the supply air rate decreases.
6) The cooling capacity of the system can fulfill the harsh operation condition of the military vehicle.
7) Nominal cooling capacity conditions : chilled water in 12℃, out 7℃; entering DB 35℃, WB 24℃.
8) The influences of generation temperature, evaporation temperature, absorption temperature to the coefficient of performance, circular ratio and cooling capacity were also studied.
9) Suitable for YAG laser equipments, such as laser marker, laser cutter, laser welder, laser driller, laser wire-cutter etc. with cooling capacity from 1.6KW to 8.7KW.
10) The formation and the size of mushroom are dependant upon the cooling capacity of blowing gas.
11) As expected, the heat transfer rate depends on the cooling capacity rate of air.
12) Low oil level will result in an increase of condensation on the surface of cooling coil, the mixture of condensation and liquid will deteriorate the liquid and decrease the cooling capacity.
13) As effective capacity of Zinc production exceeds design capacity, the cooling capacity of Zinc electrolyte is clearly insufficient.
14) Combining with both the domestic and foreign standards,[http:///cooling capacity.html] the Cooling Capacity Rating Parameters and Its Measurement Methods for Evaporative Air Coolers Were Analyzed and Discussed.
15) In that case you may have to add extra cooling capacity.
16) Microtecnica will develop a Secondary Environmental Control System (SECS) in order to provide additional cooling capacity to support the requirements of the aircraft's new avionics system.
17) Suitable for YAG laser equipments, such as laser marker, laser cutter, laser welder, laser driller, laser wire-cutter etc. with cooling capacity from 2.5KW to 7.2KW.
18) Based on the conservation equation of energy, the changing curve of cooling capacity with the outdoor temperature and maximum value were obtained after numerical computing.