gripper造句
1. This device has a gripper that electrically twists off the jar top. Nothing to it.
2. The robot holds a small torch in its gripper.
3. Secure them to carpet with gripper tape or use the sticky weave that is sold especially to keep rugs in place.
4. When nailing or screwing down carpet gripper strips, be careful to avoid piercing any water pipes or electricity cables.
5. Belt loops and gaiter with gripper elastic.
6. The CT held by the gripper blocks is loaded by axial force, pressure of inner fluid and gripping force, and its forcing state influenced setting depth and the ability of anti-collapsing.
7. The experimental results of piezoelectric micro gripper show that displacement and clamping fore of gripper are coincident with the FEM results and linear with the control voltage.
8. With the Air Gripper System ( AGS ), spandex yarns in the weft also are woven faultlessly.
9. Gripper: Device on a printing press for holding the sheet.
10. The AG series angular gripper utilizes a double acting piston with a dual pivot system.
11. This paper presents two methods of analysis of gripper mechanism. Compared with the theoretical model, these two methods are proved to be right.
12. Solution: fine - tune gripper teeth pad with Nano - imprint lithography drum edge.
13. This means the moldable gripper can function without needing sophisticated artificial intelligence software.
14. An electrothermal micro gripper that generates rectilinear displacements and forces by V - shaped beamthermal stress was presented.
15. It is composed of the EMR gripper, the embedded network module and the data sampling circuit.
16. Even more to the point, how can it move its gripper to a given position?
17. Hanging from hooks on the wall were sets of wire-pulling devices, complete with chain winch and gripper.
18. The "EPG" (two jaw) and "ETG" (three jaw) parallel gripper lines utilize a double acting piston and rocker arm design.
19. GUDEL Double Column Workpiece Loading Device, Model LP 25/25, standing above the machine, with double gripper for finished parts and blank parts, and workpiece delivery belt.
20. Proposes to measure the wrist force using the data fusion method according to output variance of finger force sensors on the gripper.
21. The proposed methodologies are demonstrated through an example of a compliant gripper mechanism, and the prototype is manufactured to prove the validation of the conceptual design.
22. At present, the paper transfer mechanisms which are used widely at home and abroad include swinging gripper mechanism, rotary transfer mechanism and so on.
23. The technological parameters can be optimized through research on layout relations between wheel gripper, dumper, traverser, ejector etc.
24. The driving cam outline that accord with the technology demand of gripper mechanism can be designed by simulating the motion law of gripper lever by using a five-order multinomial.
25. This paper aimed at attacking and noise problem of high spot closed gripper mechanism in the running process, and made theoretical analysis and application research.
26. The technology and method proposed in this paper can be referenced by the enterprise to develop new-type pneumatic gripper products with tactility and gripping-aided function.
27. The company is specialized in producing parts of the Sool professional life Gripper Loom factory.
28. One of the most popular types of end effector is a gripper.