annealing temperature造句
1. The suitable recovery strain annealing temperature was 500 ℃.
2. The corelation of the annealing temperature with the total working rate of the cold-rolled product and the method of controlling the temperature in the mass production are particularly investig...
3. With increasing the annealing temperature, the crystal structure changes from anatase to rutile and the crystallite size increases.
4. The effects of annealing temperature on electrochemical performances of the alloy were investigated.
5. With the annealing temperature increase, Pd grains became larger and grew to form a film interlaced with the porous kieselguhr.
6. The corelation of the annealing temperature with the total working rate of the cold-rolled product and the method of controlling the temperature in the mass production are particularly investigated.
7. As a matter of fact, the annealing temperature and time influence the transition of the semicond-uctive as-grown fiber to superconductor which is a peritectoid reaction.
8. With increasing annealing temperature, the coercivity Hc decreases and the saturation magnetization Ms increases.
9. The results show that, different annealing temperature and holding time have different effects on the shape memory capability and superelasticity of the shape memory alloy wires.
10. The microstructure of TiO 2 is significantly influenced by the annealing temperature.
11. The easy axis moved from the films surface to the vertical location with the increase of multilayers' annealing temperature.
12. For the deposited films, the electrical conductivity increased with the annealing temperature and meanwhile the mobility and carrier concentration also increased.
13. Both the effects of the intermixing induced by the implantation dose and the annealing temperature on the light-emission efficiency of the quantum dots are studied.
14. Objective : To explore a method for quicker identification of the optimal annealing temperature in PCR.
15. The results indicated that the structures of MgO films were closely related to the amount of collodion and the annealing temperature.
16. The experimental results indicate: The preferred orientation of the abnormal grain growth depends on the annealing temperature and atmosphere sensitively.
17. The results also show that the apparent density of as - spun fiber increases with various annealing temperature.
18. The crystal lattice parameters of the sample are changed obviously with the change of doped concentration and annealing temperature.
19. The stress impedance effects of the as - deposited films at different annealing temperature were also investigated.
20. The back ohmic contact resistance of Al-BSF by DC magnetron sputtering is downtrend with the annealing temperature increasing, and less than that by the screen printing process.