compressive force造句
1. These thrusts are an expression of compressive forces, which shorten the crust.
2. Thus, Myosin II - dependent compressive force is necessary for normal MT bundling in the growth cone neck.
3. After distraction was removed, immediate compressive force was measured. The specimen was then placed in a loading frame to simulate head weight.
4. The calculational method for plant cell compressive force was (obtained) that was convenient for theoretical analysis and numerical calculation.
5. They are designed to create resistance to a compressive force.
6. The calculational formula for cell compressive force was (obtained) expressed by cell girth and by node coordinate and displacement of plant cell mechanical models.
7. Usually the compressive force is in the form of hammer blows using a power hammer or a press, as shown in Fig. 4.1.
8. Some embodiments are configured to ascertain the amount of compressive force that is being applied to the tissue while the thickness of the tissue is being determined.
9. In this paper, the internal force and displacement of body of the coke drum which is suffer from temperature stress and inner compressive force are talked about.
10. The longer the single drill pipe , the lesser the critical compressive force of drill stem.
11. The results showed that the buckling configuration was helical curve for the gravitational tubular under the axial compressive force and torque.
12. A statistically significant relationship was observed between distractive force required for graft insertion and immediate graft compressive force.
13. Compression springs are designed to create resistance to a compressive force.
14. After the spring has been closed to its solid height, the compressive force is removed.
15. The once once high mesitylene valence significantly drops and gave relief from cost to rise to live the compressive force of expending the fetch for dweller.
16. The monotonic shear testing of two-story model reinforced masonry shear wall in different compressive force was performed.
17. Test results show that the concrete-filled steel tube and the reinforced concrete deform simultaneously in the axial direction before and at the peak value of axial compressive force.
18. Forging is the process by which metal is heated and is shaped by plastic deformation by suitably applying compressive force.
19. Compression Springs are open-coiled helical springs that work by resisting compressive force.
20. The paper trys to analyse stability of column by the method of dynamic analysis, deduces the formula of relation between axial compressive force and frequency of transverse vibration.
21. If this work piece is held between the centers of the lathe, the centers exert a compressive force against the work.
22. The second tube (16) is configured to generally remain open in the absence of an externally applied compressive force.
23. The effect of initial deflection on the first frequency increased with either the length of drill stem or the axial compressive force on the drill stem increases.