torsion test造句
1. As with tensile and bend testing, torsion testing may be done under various stress or displacement programs.
2. Method: To use the rat's body torsion test and hot - plate test.
3. Methods: The torsion test with acetic acid was used to compare the analgesic effects of Dragon's Blood extracts from different technology.
4. A hot torsion test was used in this study for measuring and comparing the hot plasticity curve of as-cast and hot rolled HSS.
5. By means of TEM and the torsion test, the microstructure and the mechanical properties of the friction welding joint of LY12CZ alloy in the presence of the electrical field were studied.
6. The mouse hot plate method and torsion test were applied to measure threshold of pain group.
7. Axial loading test and torsion test were made. The stress-strain relation of the GSPS was observed.
8. End effects and errors due to misalignment are very important in torsion testing.
9. In the latter case the specimen is of near perfect geometry for a torsion test.
10. A design of differential stress sensor with six magnetic pole based on counter magnetostriction effect of ferromagnetic materials is given, and the torsion test and uni-tension stress test are made.
11. Through a lot of experiments and analysis, it was pointed out that the twist number of steel wire in torsion test decreased gradually with increasing axial tension load.
12. The effect of objective stress rates on constitutive model based on solid cylinder torsion test was discussed.
13. In the dissertation, within the framework of the principles of continuum mechanics, large deformation elastoviscoplastic constitutive relationships are defined by torsion test with cylinder specimens.
14. The simulation of controlled hot rolling process of bearing steel(GCr15) has been realized by use of hot torsion test equipment.
15. And some points, which effect the accuracy of the results in torsion test, were also described in the paper.
16. How to establish large strain constitutive relationship by a torsion test with solid circular shafts is proposed in the article.