separation distance造句
(1) The separation distance between the nozzle and the resonance tube and the feed pressure of the driving gas were the main considerations.
(2) When the separation distance is small, the region between two stages is filled with "dead water" flow, the bottom drag of forebody is negative, the typical "afterbody effect" phenomenon occurs.
(3) The jet penetration height, the separation distance, the separation boundary and the pressure coefficient within the separation region are estimated, and the 3-D correction is also adopted.
(4) Turns out the size of the electric field is inversely proportional to the separation distance.
(5) Power cabinet can be placed beside the inductor, properly adjust the position to operate conveniently, but the separation distance should be short as much as possible.
(6) We show that the influence of a boundary on the drag coefficient is more important than that of the nature of a fluid and that of the separation distance between two spheres.
(7) In this paper, the method for the optimal gray threshold is given, which is based on the maximum class separation distance criterion of pattern recognitive decision theory.
(8) Using expressway's number of lanes and traffic volume, and volumes on entrance, exit, and service road as input, the methods gives the minimum separation distance based on the given level of service.
(9) Enter the pipe diameter, wall thickness and pipe material, and the PT500 calculates the optimum mounting method and separation distance for the sensors.
(10) The validity of N-S equations, the distribution of flow parameters and aerodynamic force and the relation between axial force and separation distance have been analyzed.
(11) The axial velocity and stagnation point offset of two opposed jets coming from two asymmetric nozzles oppositely located with large separation distance were studied by using hot-wire anemometry (HWA).
(12) By UMA measure, minimum error criterion is quantitatively analysed and compared with the bi-modal histogram method and the maximum class separation distance criterion in segmentation quality.
(13) The supporting pattern is formed on a base substrate with a first length, and maintains a separation distance from the array substrate.