shut-in造句
1 The office provides services for shut-ins and elderly people in Cook County.
2 I have been shut-in for a few days.
3 During the open and shut-in period of a gas well, the gas flow within the borehole changes into transient flow.
4 Only the shut-in patients had to stay inside on such a beautiful day.
5 In the following soak (shut-in) phase, the well is shut in for days to allow the heat to dissipate in the reservoir and the heavy oil to heat up and become less viscous.
6 The man became a shut-in since the death of his wife.
7 Starting with a shut-in well, a series of increasing flow rates are run at fixed time intervals.
8 With consideration of the extension of fracture after shut-in, this paper proposes a method for defermination of fracture parameters using shut-in decline curve.
9 He worked as a volunteer, delivering hot meals to shut-ins.
10 The traditional method which is based on the material balance formula uses the shut-in pressure measurement data to calculate the dynamic reserves.
11 So it is necessary to do it based on the gas well production history so as to avoid economic Lows caused by the shut-in.
12 Model TY0120 gas compressor set is developed for the secondary exploiting of the shut-in gas wells with low pressure.
13 These dongled everywhere,[www.] perfuming the gray courtyard with its shut-in light.
14 You don't know how uncomfortable it is to be a shut-in unless you have been one before.
15 Two rock bands are making a go at reaching shut-in fans, announcing a virtual concert for today.
16 But the recovery period will extend if production remains shut-in for longer, as infrastructure continues to deteriorate.
17 Though my ancestors often struggled against the Three Evils and their minions , I've always lived a shut-in, scholarly life. I'm glad that my wisdom aided you.
18 Those same rare earths are found in America, mainly in shut-in mines.
19 To date, it is common to acquire C/O data in both flowing and shut-in conditions.
20 But finding a job after having spent several years as a shut-in is extremely difficult.
21 It constructs a method for calculating formation pressure using earlier well test data according to long shut-in pressure restore data.