backplate造句
1. The backplate of H-5 looks barren and bland compared to the exuberant frippery scrolled over the same part of H-4.
2. DONT forget to buy the backplate !
3. Choose the “backplate” we saved earlier.
4. Referring to the Sachs VT5000 brake backplate.
5. First, the steel reinforcement lever on the backplate must be removed.
6. Backplate : A plate on the inside of a door through which the cylinder connecting screws and tailpiece is passed.
7. The cardinal shelf is composed of a backplate for dorsal palm and a bracket for wrist with a U-shaped rack fixed in front of it.
8. First and foremost we need to prepare a backplate for the 3D environment with the plane we need to match.
9. This backplate requires modification prior to installation on the steering knuckle.
10. First steel reinforcement lever on the backplate must be removed.
11. A drum brake backplate (17) having a vibration clamping mass (30) secured thereto.
12. This can be effective in reducing noise which emanates from the vibration of the backplate in a region adjacent a hydraulic actuating cylinder (14) of the brake.
13. Ferrules of index finger, middle finger and fourth finger and little finger are connected to the backplate on the cardinal shelf through elastic strings.
14. Once this lever is roughly cut from the round backplate, use a grinder to shape it so it conforms to the flush round figure of the backplate.
15. The thumb ferrule is set outside the ferrule of index finger on the backplate with steel wires.
16. Can these capsules be "tuned" to produce a different frequency response, by adjusting the spacing or porting of the backplate?
16.try its best to collect and create good sentences.
17. A micromachined condenser microphone with a free floating sensing diaphragm and a perforated thick copper backplate is presented.
18. You can adjust turns tension by tightening the inside stop nut on the rotor shaft against the backplate to provide a more pleasing tension.
19. A newly developed pipeline plug is composed of a central pipe, balloon, piston, spring, clamp, backplate, inside and outside joints, connecting plate and a wedge key.