corrugation造句
(1) If the period of corrugation is too small, the linearity of operating mode becomes very poor.
(2) By an analysis on various causes of corrugation, the surface grinder processing and solutions are mainly presented, thus the quality of grindering is guaranteed.
(3) The combination of corrugation and the circular tube results in an extremely strong structure.
(4) The bearings of corrugation roll are lubricated by high temperature grease or lubricated by lube oil.
(5) The cause of view angle corrugation produced in precision turning on universal lathe is analyzed.
(6) Two types of structure of corrugation tank in the whole sealing oil-immersed transformer are introduced. Their economic and social benefits are analyzed.
(7) A correlation of packing efficiency HETP vs. corrugation angle was derived from mass-transfer fundamentals. A graphic correlation for structured packing flooding was also developed.
(8) Two types of structure of corrugation tank in the whole sealing oil - immersed transformer are introduced.
(9) After forming, the lining, film and the upper can closely joint , with our corrugation, and sparging.
(10) The column diameter can be kept constant by changing the corrugation angle of structured packing.
(11) This same stick-slip mechanism has been strongly implicated in the formation of short-pitch corrugation and associated roaring noise.
(12) Bragg structure is usually a kind of periodic structure with continuous corrugation phase, which has excellent mode selectivity and frequency selectivity properties.
(13) Bubble water is too long, skin absorbed moisture and expand, change so corrugation knits.
(14) The mechanism of suppressing mode competition in gyrotron traveling wave tube amplifier with helical corrugation is illuminated.