brightener造句
1. The factory under: abrasive, grinding fluid, brightener, PU lining.
2. Domestic professional manufacturer of series of zinc brightener.
3. As brightener and leveling agent in nickel bath.
4. The absorption curves of the brightener UBAC 1A of bright acid copper plating and cupric sulfate of the bath were mensurated by experiments respectively.
5. Safety: Pulp brightener is safe and environmental friendly as it's non - toxic and non - corrosive.
6. Optical brightener ( Optical brightness agent ): Synonymous with Optical bleaching agent.
7. Emulsion latex uniform requirements leather brightener, viscosity moderate, non - layered latex long - term placement.
8. The influential factors(temperature, brightener and glucide ) on the coating performance were discussed and the problem that coating level off performance of Cu-Ni-Cr plating process was resolved.
9. A new method for determination of benzoyl brightener by multiplying photometry is first reported.
10. Covering power, throwing power, polarization value, polarizability, peak point potential and peak point current of the brightener are also almost equal to those of the abroad counterparts.
11. A unique formula containing highly active alkali, excellent surface-active agent, water treatment agent, stain-resistant re-attachment agent, fluorescent brightener and so on.
12. Shangyu Shanhu Chemical Industry Factory. The main products are " Yunlong Brand " brightener, diffuser agent, soft agent.
13. A new technology for chemical polishing of copper in weak alkaline solution has been developed and a brightener (containing corrosion inhibitor and surfactant) has been found out.
14. The working principle and foe advantage of dual screw melter are described in this paper, the production technology of fluorescent brightener is discussed in detail.
15. By using sulfobetaine derivant as leveling agent and polybasic acid as complexant of interfering ions, the brightener SN-1 for nickel plating is developed.
16. The influences of the parameters of pulse power, the concentration of silver nitrate, potassium cyanide, DMS brightener in the bath and temperature on deposit quality were discussed.
17. A bright chloride zinc plating bath containing a special brightener BDZ has been investigated.
18. A new immersion plating process was developed in which copper sulfate and stannous sulfate were used as main salt, with addition of complex, brightener and stabilizer to tin salt.