flexural strength造句
1. The flexural strength and tensile strength slightly decreased.
2. AIM:To compare the compressive strength, tensile strength and flexural strength of bulkily filled and incrementally filled visible light-cured composite resin.
3. Pultruded fiberglass is stronger, and has higher flexural strength than timber.
4. The relationship between nucleation temperature and flexural strength was investigated.
5. The flexural strength, relative dielectric constant and dielectric dissipation factor of the composite were measured.
6. The material mechanical properties, such as flexural strength, are measured by three point bending techniques.
6.try its best to gather and build good sentences.
7. Flexural strength and elasticity decreased significantly with increasing wood content.
8. The tensile strength, impact strength, flexural strength, thermal properties and morphology of the composites were investigated.
9. The calculation of flexural strength of reinforced concrete members in Code for Design of Concrete Structures (GB50010-2002) is the equivalent rectangle method based on the plane section assumption.
10. Compressive strength, splitting strength, flexural strength, compressive resilience modulus and flexural resilience modulus of cement stabilized stone of different structure types were tested.
11. The flexural strength calculated on the basis of the plane section assumption and strain compatibility condition agrees well with the test results.
12. For flexural strength test of cement specimen and other nonmetallic material.
13. Calculated expressions including reinforcement ratio are deduced, which are applied to calculate flexural strength, deflection and maximum value of crack width of RC beam with rectangular section.
14. As concrete fine aggregate, it can improve structure of interface between aggregates and cement paste for its reactivity, then can increase the concrete flexural strength.
15. The results show that composite inhibitors have excellent corrosion inhibition efficiency and won't give bad effect on cement setting time , flexural strength and compressive strength.
16. Advanced technical ceramics. Monolithic ceramics. Mechanical properties at room temperature. Part 1: determination of flexural strength.
17. Load versus deflection is being recorded. Absorbed energy quantities are translated in toughness indices (USA) or an equivalent flexural strength (Japan, Europe).
18. The poor compatibility of HGB with composite materials resulted in lower figures of the tensile strength, flexural strength and impact strength after adding HGB.
19. Glass fiber is used to reinforce material for increasing toughness, flexural strength, and tensibility in unsaturated polymer modified concrete.
20. Zirconia ceramics used in all-ceramic restoration of prosthodontics has shown favorable biocompatibility, chemical stability, flexural strength and color property.
21. With theoretical method based on the assumption of plane section, the influence of steel reinforcement ratio, CFRP amount and initial loading level on the flexural strength is analyzed.
22. The grouting material have ultra-early-strength, no shrinkage, early high flexural strength and so on... Simple construction Operation and easy accession to technology.