trunnion造句
1. The unique part of the mounting is the trunnion.
2. The trunnion sprocket has come off the pinion, but do not worry - we'll soon but that right.
3. Special Trunnion sizes and configurations are available. Consult factory when ordering.
4. Trunnion Design: Upper and lower supports retain ball under pressure.
5. Trunnion - Wedgepluge non lubricated plug valves have unique purging and flushing capabilities.
6. Each hydraulic hoist of eccentric trunnion sector gate consists of two sets of cylinders and one set of hydraulic pump station.
7. The fixture supports two trunnion shafts attached to the support structure of the receiver Lifting lugs would be located on the top end of the support structure.
8. Trunnion bascule bridges are doubtless one of the renowned bridge types in Chicago.
9. Reduced trunnion drag and energy waste because the trunnions on the VR Taper bucket are positioned on the rear taper effectively reducing the area of the trunnion exposed directly to soil flow.
10. Has the ability to purge through the trunnion to keep both the trunnion and the cavity clean.
11. In general, WILLIAMSONs trunnion ball valve features the front ball sealing design structure.
12. By means of a 1/17 scale hydraulic model of the lock culvert valve of the TGP, the valve trunnion loads were measured and their fluctuation values and characteristics were analyzed.
13. The flexible connecting bolts are important fastenings connecting the DEMAG converter shell with its trunnion ring.
14. A method of determining the sight line offset and its causes with- out adjusting the trunnion is suggested.
15. The stress status in the reagin of fitting runner blade trunnion with runner hub for kaplan turbine have special attention in hub design.
16. Pressure - compensated air bearings are used on both ends of the trunnion axis.
17. And we analyzed the effect of the big gun erect axis incline trunnion axis is out of the vertical of the erect axis and the big gun axis is out of the vertical of the erect axis to measuring accuracy.
18. In this paper, the construction, principle and reasonableness of J seal of turbine guide vane trunnion are presented.
19. Steel converter is the main equipment in steel-making, and the drive mechanism, trunnion bearing, is the key component of steel converter.
20. The article briefly introduces the centre drive technology with transducer lower trunnion for Ljungstrom air preheater.