dowel造句
1) He whacked his pants leg with the dowel.
2) Ram a smaller length of dowel with a hollowed-out point dipped in Vaseline into it.
3) The dowel is gripped in a drill, and run at low speed, with a little pressure.
4) Holly was inspecting the wooden dowel on the staircase with the intensity of an archaeologist with a shard.
5) Not all parts will receive dedicated dowel pin holes.
6) The carpenter gauged the dowel with calipers.
7) Our main products include redirector dowel, armor plate spring dowel, armor plate spring stationary rings series. there about hundred products of three series which occupancy 100% at FAW market.
8) Tack out the dowel in lower part of handle of the valve,[http:///dowel.html] and undraw the agraffe gently. Rotate handle of the valve clockwise to open valve to begin discharging.
9) It designs two spring dowel locating systems to rotate and locate the part.
10) One four foot length of wooden dowel that fits inside the pipe.
11) Tooling Plate: Universal mounting pattern with standard dowel locating holes.
12) Objective : To make the dowel nucleus fusion model with self - cured acrylic resin ingot.
13) Pull out the jig dowel posts, get your hand into the sound hole and carefully peel away the cardboard jig.
14) The properties of mini-finger joint in corner, dowel joint . tenon and mortise joint were compared and studied through experiment.
15) The device can automatically mount single part and dowel into a work - piece that contains four parts.
16) Fit a dowel pin here to keep the adjacent parts aligned.
17) Auto inserted technology of dowel bar is one of important technologies for long - life pavement.
18) Depending on what profile you want to achieve, you may also need to improvise with lengths of dowel or similar implements.
19) The reason for abrasive wear resistance enhancement of bionics smooth surface made by Laser Carving Technology is grain super-refining strengthening, hardening, effect of dowel pin and bionics.
20) Objective To compare the long term effectiveness of three types of dowel pin as treatment post core crowning.
21) What would be the bottom surface of the block is then skimmed flat, and locating dowel pin holes are drilled.
22) Ball Plunger Soft - tip socket set screw , socket screw , disc spring, dowel pins , springs pins , washers.
23) Machining precisions of axles and holes correlating with the space position of brake drum's positioning dowel on the trailing arm are the main factors determining the rear wheel alignment parameters.
24) There are three rings, shaped spacers that keep the rings above the base with the clock face, and a hardwood dowel rod.
25) The connection type between the vertical guide plate of the vertical adjusting mechanism and the positioning plate can adopt compression-fitting connection or dowel pin type connection.
26) Equilibrium differential equation and boundary condition were deduced first, adopting variation principle, and then the analytic generic solution of the deflection of dowel steel was obtained.
27) Abstract:Objective To compare the restorative effects of crown lengthening surgery and gingivectomy on dowel crown of deep-seated subgingival teeth fracture.
28) Press fit buttons with other than centered round holes will use dowel locator for position or flat key. Dowel locators are preferred due to space requirements.
29) Under load conditions , the stress - producing characteristics of the dowel increased with shorter lengths and smaller diameters.