lath造句
1. A smile of lath opened amid powdery fallout.
2. Long strips of ceiling lath sheared down into the rooms.
3. He devised metal lath and corner trim long before it became standard.
4. I found this lath back by far the most comfortable and remarkable, its size being ideal for my build.
5. X precipitate phase and the lath structure.
6. He's as thin as a lath.
7. Granular or lath be-bainite was formed in as-welded metal.
8. A as thin as a lath women.
9. The little boy was as thin as a lath.
10. The lath like carbide free ferrite and retained austenite has been observed by transmission electron microscope.
11. Furthermore, both the effect of martensite lath boundaries on the nucleation of dynamic recrystallization, and the mechanism of nucleation and growth of equiaxial nanometer grains were revealed.
12. Lath Length: up to 2440 mm or customized according to customer requirements.
13. The loaders fix the independent lath and can be movably arranged on the loader guides.
14. These lath martensite first nucleates in parent austenite intergranular and twin boundary.
15. In welding zone the lath shape microstructure reduces, and equiaxed microstructure increases.
16. Tack, then machine the lining to the outer fabric along these marked lines to form lath channel.
17. Measure and mark the fabric to the length of the measurements taken, plus allowances for covering roller and lath.
18. The result indicates that there was a great deal of lath martensite in the quenched structure.
19. The microstructure of the weld metal and the coarse-grained heat-affected zone are both granular bainite that consists of the bainite lath and the M-A constituent.
20. Qinggang keel various types of gypsum board ceilings, including paper gypsum boards, decorative gypsum boards, fibre gypsum boards, hollow gypsum lath.
20.try its best to gather and create good sentences.
21. In order to look for the reason of a main shaft sinkage in a heavy-duty horizontal lath, a finite element model for the lath's main shaft system is established based on ANSYS.
22. The results show that, typical morphologies of vanadium carbide appears in the shape of sphericity and strip, and chromium carbide appears lump and lath.
23. I was shocked at his appearanceso grey - faced , and thin as a lath.
24. Balsa . This hull should really be done on a lath but you know me.