butterfly valve造句
1. The NIBCO HPR butterfly valve can be provided with heavy - duty weatherproof operator and indicator.
2. This setup consists of a butterfly valve and a rotary electromechanical actuator.
3. The butterfly valve structure principle is particularly suitable for production of large - diameter valves.
4. The butterfly valve butterfly plate installed in pipeline diameter direction.
5. The ZSFD Wafer Signal Butterfly Valve consists of the wafer butterfly valve and electric control device.
6. Selector switches for the by - pass butterfly valve is located on MCC 2.
7. Baumann 21000 Elastomer Lined Butterfly Valve angle seating disk design minimizes liner shearing especially on non-lubricated dry gas service.
8. The main products are: gate valve, butterfly valve, ball valve, piston valve, globe valve, hydraulic control valves, pressure reducing valve such as the eight series over 100 kinds of specifications.
9. The high-temperature butterfly valve is a key valve in the fluid catalytic cracking unit.
10. Butterfly valves are commonly used for clip-on butterfly valve and two valves Flanged.
11. Hsieh Yu butterfly valve is designed for installation with square screw, nut and washer.
12. It is completely opposite to the butterfly valve of the exhaust pipe connected to the muffler.
13. This Butterfly Valve is bi - directional and may be installed in either direction.
14. There is butterfly valve fit at the bottom of cyclone segregator , which is opened when working and shut down when exchanging the collecting canister.
15. The handle ( or gear box ) of butterfly valve can be rotated backward or forward for 180 degrees.
16. A butterfly valve seal and metal shells of the two sealed sealed type.
17. Simple construction of the Model - C butterfly valve results from its unique design.http://
18. ITALY OMAL pneumatic actuator, pneumatic butterfly valve, pneumatic ball valve, VIP pneumatic shuttle valve, electrical butterfly valve.
19. Click here to learn about Ball Valve, Gate Valve, Butterfly Valve, Solenoid Valve, or Needle Valve.
20. Two film plating chambers are formed into a whole via a forvacuum pipeline, a butterfly valve, a high-vacuum three-way pipeline and a gate valve.
21. Such as gate valve, globe valve, ball valves, plug valves, valve, butterfly valve and so on.
22. The movements of check valve located at Valve valve seal on the Butterfly valve seat surface.
23. Main equipments such as: large - scale vertical lathe, borer, butterfly valve testboard etc.
24. Butterfly valves are commonly used for clip - on butterfly valve and two Flanged butterfly valve.
25. Baumann 25000 Butterfly control valve is a low torque and low noise butterfly valve.
26. Introduction of the selection procedure of control ball valve and butterfly valve and the empiric selection of the coefficient in calculation.
27. This paper introduces the automatic tracing equipment of PTA ( plasma ) applied in triple eccentric butterfly valve.