cover plate造句
1) Mrs Abigail carried the two covered plates, one on top of the other, using a tea-towel because they were hot.
2) Parts and components products include: chassis, cover plate, stamped steel , brush components, electrophoresis rotor, etc.
3) The injection mould for a duplicator cover plate is designed.
4) Reattach cover plate to make an air and water tight seal.
5) The forming thethe structure of the diethe cover plate and the die manufacturing process were introduced.
6) The ultrasonic transducer vibrates longitudinally, its front cover plate links up with a half wavelength circular conical horn to increase the amplitude of the output end of the ultrasonic transducer.
7) Bolted cover plate to protect seal and cylinder from the ingress of debris.
8) Remove the cover plate of the relief valve by removing the four connecting screws.
9) Disconnect the hose from the bottom cover plate to the relief valve.
10) Remove all nuts and bolts from cover plate and take off plate.
11) The detachable cover plate of the trap agent case is installed at the trap agent channel.
12) Loosen bolts on groove coupler and remove groove coupler and cover plate from body.
13) The result shows some cracks appearing on vertical weld connecting web plate of body bolster and draft sill as well as the part between web plate of body bolster and top cover plate.
14) The complex pump body in the pump is fabricated by that a pump body, a whorl casing, a liquid inlet pipe, and a cover plate are assembled.
15) Our company specializes in producing high - grade ware and bathroom accessories and plastic cover plate.
16) If need to put a word in bed cover on the first go to bed cover and the tools and turning on a bed cover plate.
17) An injection mould with open-type cavity and slide block type of ejection mechanism was developed after an analysis on the forming process of a slicing insulating cover plate.
18) Loosen bolts on groove coupler and remove groove coupler and cover plate from valve body.
19) The invention provides a feeding distributor with anti-cyclone baffle plate, which comprises an inner muffle, a cover plate, a guide plate and an anti-cyclone baffle plate.
20) I also found bits of wood and metal filings on the inside of the cover plate.
21) Adjust the Mounting Bracket so that the Sensor sits flush against the Cover Plate.