crank arm造句1. Affix using one of the crank arm fixing bolts.
2. They sit pretty close to the crank arm and we've been quite pleased with them so far.
3. Aim to the serious subfilling of the crank arm, the construction of"constrained wing"was presented to form the favorable die filling instead of increasing the forging size.
4. Operations on multi-points are available through the crank arm framework.
5. Each piston has a crank arm attached to a crankshaft.
6. The RW Series Rotary Actuator design utilizes two independent piston cylinders[/crank arm.html], each piston has a crank arm attached to a crankshaft.
7. Remove the crank bolt first when adjusting a bicycle bottom bracket and then thread the crank puller into the crank arm.
8. The utility model is composed of a land wheel, a driving pin, a driving crank arm, a driving inserted link, a release spring, and a driving ratchet.
9. The traditional wobble box drives the cutting bar to finish to and fro motion due to the function of wobble, wobble yoke and crank arm.
10. The crankshafts shown in Fig 1-4 is actually made up of various parts such as main bearing journals, rod journal, crank arm, bearing, counter balanced weight and flywheel end.
11. Horizontal double sided NC combined drilling machine is specially designed for the machining of main shaft journal hole and crank arm journal straight oil hole of crankshaft with six cylinders.
12. To power the machine, several people would turn a crank arm connected to the vacuum pump.
13. Turn the wiper module over and remove the nut that secures the wiper motor crank arm to the wiper motor output shaft .
14. NC combined drilling machine is specially designed for the machining of main shaft journal hole and crank arm journal straight oil hole of crankshaft with six cylinders.
15. Based on the analysis of plastic flow law in crankshaft forming, the cause of typical forming defects, i. e. the folding existing in the crankshaft pin and crank arm was found out.
16. Rotary Actuator design utilizes two independent piston cylinders, each piston has a crank arm attached to a crankshaft.