nc造句
61 NC automatic programming for hob relieving grinding wheel dressing is introduced. Base on analysis of the principles of wheel dressing, the mathematic models on wheel dressing are established.
62 My screen for the Great Wall in Qinhuangdao plant transformation Four Units 1 NC Special Purpose Machine, satisfying the users processing large projection screen tooling needs.
63 Good or bad presetting tool not only directly influences the precision of manufactured part, but also the operation of NC machining tools.
64 The neural network has a good nonlinear function approximation capability, which can be used in NC machine error identification.
65 Stimulating the NC system with the M-sequence signal produced by computer and sampling its output data, this method identifies the model of the closed-loop system with the Least Square Estimation.
66 Aiming at the rapid design issues of NC programming for variant part, a rapid NC programming method, which is based on the master NC programming template of master part model, was researched.
67 A fast display algorithm for 3-axis NC milling machining graphical simulation is researched and realized.
68 It's discussed that self-excitation vibration mechanism with creeping phenomenon for lower motion parts running speed in NC machine tool feed system.
69 The constitutes and using methods of subroutine and macroinstruction during NC milling are stated.
70 This paper proposes an excellent algorithm for NC linear interpolation on the basis of trial-and-error method.
71 NC State's Department of Sociology and Anthropology is part of the university's College of Humanities and Social Sciences.
72 A logical tool refers to a certain class of demanded cutting tools in numerical control (NC) program and can be obtained using a method for set covering problem.
73 The manufacture precision of super exactitude NC lathe depends on not only the operation rate of NC deviceand joined precision, but also the error of track and point location about servo system.
74 In late August of 2002 I moved into a two-floor apartment in a small town about 30 minutes south of Greensboro, NC where I was attending college.
75 First, high-precision optical grating and encoder disk is used as a detection device, which measures linear displacement and angular displacement of NC mechanism, and then collects error data.
76 In this paper a NC feeding system of punch press by single chip micro- computer controlling is introduced. The paper related the idea of its designing, principle of operation and its application.
77 This paper introduces a new theory and realization of computer figure simulation which focus on the process program of NC device.
78 Eastern NC today, the disclosure, the company signed with the Swedish Yikesikang " EIM - 01 manufacturing license agreement. "
79 It has functions such as remote call, NC program management and so on, and drip feed is supported.
80 According as modular idea, NC program interpreter that interprets RS274/NGC is divided into scanning module, lexical analysis module, syntax parsing module and executing module.
81 This NC Pleating machine is not only able to pleat complicated patterns but also able to control the temperature of heat set fabric and to control the length of plicated fabric.
82 The factual development and running of NC simulation system shows the proposed methods is concise and practicable. The NC simulation system can runs smoothy and reliably.
83 In this paper , a hybrid programming system for NC turning operation is developed.
84 The PCB NC drilling machine is key technology equipment in the PCB's precise hole site processing.
85 In NC machining, rough machining costs most of the machining time.
86 According to the practical processing problems of the enterprise in this project, studied and explored the NC machining auto-programming of special-section mould of construction forming machines.
87 The user may choose the configuration of the pumping more than the torch, can be configured on demand NC heterotypic torch system, which can automatically matching in crease system.
88 In this paper, a NC-system with SIEMEMS's7-200PLC has been proposed, The equation of track about blade, and the NC sofeware have also been introduced.
89 Finally the NC codes were generated after post process and the automatic programming was completed.
90 Based on CNC table. a reference point presetting method is introduced giving a reference to NC machine to of users and makers.
12345678910