hold time造句
1. Accordingly, hold time most crucial to them.
2. When the hold time expires, DUAL is informed of the topology change, and must recalculate the new topology.
3. Keep the server hold time to a minimum and client poll time to a maximum, if at all possible.
4. Packets should be received within the Hold Time interval period to maintain a Passive state. The Passive state is a reachable and operational status.
5. Is there a documented maximum hold time for panels with laminated photoresist before copper plating.
6. Defect: Calls with hold time equal and greater than 60 seconds.
7. The conditions that the parameters including high-priority token hold time and target token rotation time must satisfy are given.
8. The mechanical property of polymer depends on the factors such as temperature, hold time of stress, speed to load and condition , one of the most important is the dependence of temperature and time .
9. By adding a transistor with some capacitors, diodes, and resistors, you can transform a pure-manual reset to an automatic reset with adjustable hold time for the reset IC.
10. When I checked during testing, Symantec was estimating 12 minutes hold time for phone support, versus 2 minutes for live chat.
11. Three numbers for three clicks, the first being 196-tenths of a second in hold time.
12. In this paper, the varying laws of the properties of cordierite-containing honeycombedceramic were studied when firing temperature and hold time were changed.
13. If EIGRP does not receive a packet from a neighbor within the hold time, EIGRP considers that neighbor down.
14. How long did my nose do an operation to you can hold time?
15. According to RSDS specification and focusing on performance of the minimum setup and hold time, the design of differential signal amplifier for RSDS receiver is analyzed in detail.
16. Since world cup of the first rugger was held in New Zealand 1987, this match every other is held 4 years, this year hold time to come from September 9 on October 23.
17. The delayed elastic deformation stage came later, the bend deflection increased more quickly, and breaking life shortened with the increase of the prolongation of the maximum load hold time.
18. The creep damage and cycle stress relaxation are found to be greater when hold time is increased and the crack propagates from transgranularly to intergranularly.