sintered造句
61. Hydrogen Decrepitation (HD) process has been widely used to crash NdFeB ingots in sintered NdFeB magnet industry.
62. Preparation of high performance Nd Fe B sintered magnet by strip casting ( SC ) process was studied.
63. The sintered test used carbonate tailings as main materials composed with fly - ash.
64. The transitional phase appeared when two ferroelectric powders with different Curie point were and sintered together.
65. The return fine rate of sintered ore is an important factor to influence production cost of before iron making process.
66. Densification mechanism of metal powder sintered with selective laser was studied.
67. The effects of different process parameters such as laser power, scanning speed, preheat temperature, powder-bed depth on the sintered quality were studied systematically.
68. The inventive slurry can be plated on the ceramic basic plate to be sintered in high temperature to prepare the thick-film force sensor with high gage factor.
69. Transverse rupture strength, Rockwell A hardness, magnetic saturation induction and magnetic coercivity of samples sintered in vacuum or by sinter-HIP were measured.
70. The exceptional tool performance of sintered carbides results from their very high hardness and high compressive strength.
71. The exceptional tool performance of sintered carbides results from their very high hardness and compressive strength.
72. Test results have proved that the basic design concept of sublimator is feasible and that sintered powder porous plates can meet experimental needs of sublimator.
73. The application of the technology of adding both polyacrylic fiber and lightly sintered magnesia in concrete played a remarkable role in crack control of concrete facing slabs.
74. There always severe lumping phenomenon during the ageing stage of the sintered ceramic abrasives forming materials.
75. The author points out that it is full feasible to use the Yellow River silt to produce sintered multiple-hole brick. The technology key is effective ageing and homogenisation of raw material.
76. Machinability of P/M sintered steels with manganese sulfide and calcium fluoride additives is investigated and analyzed by experiments of sintering and cutting on milling machine.
77. This feasibility study focuses on applying non - sintered porous concrete material for planting.
78. The friction and wear properties of the sintered samples were analyzed.
79. However, with a lead tolerance of about 60%, when sintered, employed and disused, PZT ceramics will produce heavy metal pollution, which is harm to human health.
80. The SM master alloy was used to add high oxygen affinity elements Mn and Si into the sintered steel as alloying elements to improve the mechanical properties.
81. The carbon pick-up was successfully overcome and the final sintered MIM parts of excellent mechanical properties were produced.
82. There are some problems in manufacturing of Semi-finished Product of Cemented Carbide Glass Cutter. It is difficult to shaping and there are always carbon elimination and carburize after sintered.
83. The influence of various bronze powder additions on density AISI 316 L sintered stainless steel was studied.
84. In sintering process, for melted mineral fines bind unmelted core ores when cooled, the self-intensity of binding phase in iron ores is one of the basic indexes to estimate sintered binding status.
123