flexural造句1. And yet with flexural and impact strengths comparable to the very highest quality conventional concrete roof tiles.
2. It is possible that a similar flexural effect is associated with great escarpments along passive continental margins.
3. The flexural strength and tensile strength slightly decreased.
4. Based on the theory of potential and flexural isostatic compensation, the relationship between ocean depth and the vertical component of gravity gradient anomalies is derived.
5. AIM:To compare the compressive strength, tensile strength and flexural strength of bulkily filled and incrementally filled visible light-cured composite resin.
6. Anisotropy of the flexural response of the lithosphere in the Canadian Shield.
7. Pultruded fiberglass is stronger, and has higher flexural strength than timber.
8. The relationship between nucleation temperature and flexural strength was investigated.
9. The flexural strength, relative dielectric constant and dielectric dissipation factor of the composite were measured.
10. By the damage evolving relation proposed the flexural process of the trisection specimens of wet-sieved and fully-graded concrete was numerically simulation.
11. The material mechanical properties, such as flexural strength, are measured by three point bending techniques.
12. The flexural vibration deformation and vibration radiation noise of piezoelectric vibrator were researched.
13. By applying formal asymptotic analysis and Laplace transformation, we obtain two-dimensional model system of linearly viscoelastic "flexural" shell from three-dimensional equations.
14. Flexural strength and elasticity decreased significantly with increasing wood content.
15. But if the lithosphere along the margin has sufficient rigidity the resulting imbalance in load will be accommodated through flexural isostasy.
16. The effects of secondary torsion on shear strength of biaxial flexural reinforced concrete beams are analyzed.
17. Calculated expressions including reinforcement ratio are deduced, which are applied to calculate flexural strength, deflection and maximum value of crack width of RC beam with rectangular section.
18. Along with the development of the longitudinal steel stress in two-stage flexural RC composite members, location of neutral axis is in11unced by two-stage loading.
19. It follows that the dynamic sequences in Zone A are made up of the flexural deformation systems tract(FST)and viscoelastic deformation systems tract(VST).
20. A new experiment of measuring modulus of elasticity with the flexural method on the experiment device of CSY sensor system is introduced.
21. As concrete fine aggregate, it can improve structure of interface between aggregates and cement paste for its reactivity, then can increase the concrete flexural strength.
22. The indoor lab test results showed that mineral admixture brucite fiber reinforced concrete can improve the flexural tensile strength of concrete.
23. In this case, the power is supplied by piezoelectric flexural transducers.
24. In order to know chloride diffusion characteristics well in concrete at tidal zone, chloride diffusion rules in concrete were studied under the effect of dry and wet alternation and flexural load.
25. Formula for internal resistance ratio under a quick section - load, expressions on sectional flexural torque and shear force when rod bent are given.
26. In this paper, based on the study of compressive performance and shear strength of Yellow River silt bearing cellular bricking structures, the study of flexural behavior is also carried on.
27. The results show that composite inhibitors have excellent corrosion inhibition efficiency and won't give bad effect on cement setting time , flexural strength and compressive strength.
28. It was found that the floor slab make the structure as a whole, while the flexural rigidity and capacity of the frame have been enhanced.
29. Advanced technical ceramics. Monolithic ceramics. Mechanical properties at room temperature. Part 1: determination of flexural strength.
30. Load versus deflection is being recorded. Absorbed energy quantities are translated in toughness indices (USA) or an equivalent flexural strength (Japan, Europe).