supply voltage造句
31. During normal operation the memory elements may be powered with a power supply voltage that is larger than the programmable core logic power supply voltage.
32. Reference source outputs a stable reference signal which is independent of power supply voltage, temperature and process.
33. The filament current and x-ray power supply voltage are checked before the exposure signal can be transmitted.
34. Accordingly, raising percent of pass power supply voltage is the main task of power supply enterprise.
35. The load current is calculated from the supply voltage and the load power ( or resistance ).
36. This paper presents a novel current source which is insensitive to supply voltage.
37. As another example, the logic state of the select signal can be changed in response to a change in the power supply voltage provided to the phase frequency detector.
38. Voltage generated by the motor at the instant of reclose may be equal to the supply voltage but exactly out of phase.
39. The characteristics of nonlinear amplifier change with temperature and supply voltage. In order to ensure stability of amplifier, the adaptive predistortion becomes very important.
40. Simulation results indicate that V 2 control responses quickly to supply voltage change and load change.
41. The power consumption is 34 mW and supply voltage is 1.8 V.
42. If the efficiency of servo amplifier is considered, it is practicable that the power supply voltage is about 3 times as large as the servo amplifier output voltage corresponding to rated current.
43. If the project parts list does not specify a voltage, choose a capacitor with a rating which is greater than the project's power supply voltage.
44. The filament current and x - ray supply voltage are checked before the exposure signal can be transmitted.
45. Check that the voltage plate on the motor is suitable for the supply voltage available.
46. The paper derives out the proper power supply voltage of city road lighting according to the illuminance and life span character at different voltage level.
47. A supply voltage can be supplied at the primary winding and the transformer provides a current and a voltage at the secondary windings.
48. The reset unit is used for determining whether to generate a reset signal according to the level of the power supply voltage when receiving the first voltage from the over-temperature protection unit.
49. It also must be large enough to withstand the supply voltage.
50. The switching circuit determines whether to apply the power supply voltage to a chip in response to the control signal.
51. However if the supply voltage or ambient temperature is low the machine still reduces input power at this preset time.
52. During data loading operations, the memory elements may be powered with a power supply voltage equal to the programmable core logic power supply voltage.
53. Don't forget that the actual plate voltage swings both above and below the supply voltage, and the center of the swing is the actual plate supply voltage.
54. Some parameters affecting the frequency and magnitude of power supply, such as supply voltage, duty of control sigal. the R and C of oscillation circuit are discussed.
55. A supply voltage monitor and protection circuit is presented, and its theory of operation is analyzed.
56. Like the transformer coupled circuit, the choke feed in the parafeed circuit allows the output to swing above and below the power supply voltage.
57. The reference voltage, VREF, is applied externally and can be set up to the supply voltage, VDD.
58. An approach for designing analog current - mode circuits with very - low supply voltage requirements is described.
59. The gain of the PMT, that is the ratio of anode output current to the photoelectric current from the photocathode, is directly related to the supply voltage.
60. A low supply voltage sample-and-hold circuit for a pipelined analog-to-digital converter is described .
123