Boot loader造句
1. At this stage, the second-stage boot loader checks the system hardware, enumerates the attached hardware devices, mounts the root device, and then loads the necessary kernel modules.
2. To reinstate GRUB as the system boot loader it needs to be reinstalled into the MBR.
3. A separate boot loader must then be installed into the MBR and configured to pass control to the secondary boot loader.
4. You will use a boot loader like LILO to operate the boot process.
5. The GRUB MBR boot loader merely searches for a special boot partition and loads a second stage boot loader.
6. EFI includes its own boot loader, so you can boot from a GPT disk on an EFI-based system.
7. Primary boot loaders are where the first stage of the boot loader is installed on the MBR (per the previous description).
8. Select the appropriate boot loader configuration, as shown in Figure 8.
9. At the boot loader prompt, you can press the Tab key to see all of the available labels you can type to boot your machine.
10. The boot loader for the MediaMVP still needs to have a dongle.bin file in the canonical format.
11. The first 446 bytes are the primary boot loader, which contains both executable code and error message text.
12. The second stage boot loader is the real meat of the boot loader; many consider it the only real part of the boot loader.
13. Assemble language was used to write second boot loader, and 16-bit parallel asynchronous memory Loading mode was adopted to achieve automatic run after energization.
14. A glance would be gave at boot loader and software porting.
15. The first-stage boot loader scans the table, looking for the active partition; when the loader locates the partition, it loads the second-stage boot loader into RAM and invokes it.
16. In the first stage of the boot, the BIOS loads a part of the boot loader known as the initial program loader, or IPL.
17. The problem: Turning on the computer results in a message that states Windows can't boot because something is missing (a boot loader, an important file, etc.) or something is wrong.
18. LILO halting at this point indicates the second stage boot loader could not be executed.
19. Consider the challenge of creating a Linux bootable CD-ROM, which consists of a boot loader, an initrd, a kernel, and a loopback filesystem sitting on the CD.
20. Before I discuss booting up your new drive, a little boot loader theory is required.
21. With the kernel image in memory and control given from the stage 2 boot loader, the kernel stage begins.
22. The screen that appears prompts you to customize the boot loader configuration, as shown in Figure 12.
23. Three main classes of software all require GPT support: the kernel, the boot loader, and low-level disk utilities.
24. If you have multiple operating systems installed on your server, you need to select which one you want from the boot loader menu.
25. Once this has loaded, it then enters an intermediate stage between the common boot loader stages one and two (or for argument's sake, Stage 1.5).
26. Because most disk devices use a sector size of 512 bytes, the first-stage boot loader code must be very small.
27. If LILO stops here, there were problems loading the second stage boot loader.
28. Some files must be accessible to the BIOS or boot loader at boot time.
29. To lessen the risk of getting a bad configuration for the boot loader in RHEL 4 or 5, always create a boot partition (/boot) for your system.
30. This action is used initially to locate the second stage boot loader, which holds the remainder of the loader.
12