busbar造句
(1) The inset picture shows a slotted bus-bar for use with the optical sensor.
(2) Hardware designing and collectiveness of busbar protection.
(3) Cover shrouding on busbar provides extra protection.
(4) The current transformer is fully enclosed and busbar structure.
(5) The HVDC busbar corona characteristic is the main factor taken into account for choosing busbar of HVDC converter substation.
(6) If using busbar bridge between switchgears or inlet wire cabinets, should provide rated current-carrying capacity, span and height from the ground of the busbar bridge.
(7) The grounding mechanism consists of a pedestal, a busbar and a plurality of conductive components.
(8) The cracking of busbar during bending is found to be attributable to the coarsing of the grains.
(9) This paper analyzes the influence of fast busbar differential protection caused by distributed capacitance in high-voltage long - distance transmission line during transient process.
(10) Copper busbar and busbar column should be able to sustain electric stress generated by electric current of three-phase symmetrical short-circuit of 50 kiloampere and above.
(11) Busbar load characteristic parameters play avery important role in voltage stability analysis.
(12) Small bending radius, simplified busbar framework, clear arrangement, easy mounting.
(13) The conductor of busbar can be round copper tube, aluminium alloy tube or bar.
(14) Rogers provide laminated busbar solution globaly for high power electronic component interconnection.
(15) Distributed busbar protection is the principal development direction of microbusbar protection.
(16) Busbar TrunkingSystem is now designed mainly by hand, which is cockamamie and inefficient.
(17) The neutral busbar shall run along the full length of the board.
(18) Test to verify the resistance of the busbar to the flame with mechanical shock.
(19) Two screws and the busbar connected with them in a relay box ruptured during vibration testing.
(20) A main problem in the study of busbar protection is improvement of busbar protection saturation capability.
(21) This way can offer us the reference for busbar design collocation and non power compensate.
(22) The results of simulation and study show that transient - based busbar protection has fine feasibility and prospect.
(23) The database construction is consummated through the storage of busbar system unit that use flow mechanism.
(24) Easy removal of MCB, RCD or main incomer from an assembled unit, offering simple fitting of additional or replacement components without removal of the busbar.
(25) Through using network connecting mode of ether star structure, the distribubuted control system has been changed from busbar network topologic structure into a star network topologic structure.
(26) This paper describes the principle of BUS 1000 high speed static busbar differential protection device and the experience gained in commissioning test of the device.
(27) The reasons of producing electric particle of gas and the condition of air flowing in large current enclosed busbar with forced air cooling are analysed.
(28) Ttd is a private enterprise, whose business is mainly on manufacturing and processing cable bridge, metal slot and busbar and so forth.
(29) The principle of instantaneous current differential protection is applied in the calculation of distributed busbar protection, which takes the advantage of unsaturated current transducer.
(30) With the rapid development of unattended substation, the centralized supervision has made the voltage adjustment of medium-voltage busbar in the distribution network more difficult.
12