rf造句
61. Make a note of the maximum power output and the minimum power output measured by the RF through-line watt element, COM-1920 during the mode S squitter transmission period.
62. It uses RF technology replacing old twisted-pair constitute local area network, provide all the functions of traditional wired lans.
63. The subcircuits consist of the low noise amplifier, RF filter, mixer, driver amplifier, image filter, power amplifier, transmit-receive switch and IF filter and so on.
64. In this paper, the rf plasma deposited method has been reported. On the silicium substratum, the amorphous carbon film with excellent properties have been made.
65. RF power modulation is used to control the codeposition and the selective silicon removal steps with the later proceeds whenever the RF power is turned off or reduced to a low level.
66. In chapter four, after analyzing the RF qualification, I design the receive scheme of RF and IF parts, and accomplish the choosing of chip and design of peripheric connection of chip.
67. RF identification technology is widely used in industrial automation, business automation , transportation control management, security, and many other fields, and even military purposes.
68. The invention provides a cooling method and a device of a magnetic resonance imaging system. The magnetic resonance imaging system comprises a magnet, a gradient coil and an RF control console.
69. This design method can improve effectively the performance of sophisticated RF microwave system and development success rate, and reduce the development period and cost.
70. And then, this paper provided the simulation experiment of this condition. The importance of frequency stabilization of RF modul...
71. Conclusion: RF system were superior to Dick and Luque in effect on reductive fixation.
72. The converter utilizes the balanced structure, the main structure of the converter is planar. An E plane transition from waveguide to micro strip is also designed for the output of the RF signal.
73. A fast interlock circuit has been inserted into the RF system in order to protect the circulator.
74. The RF current that flows up the support structure puts an unwanted bias on the support structure and also contributes to reduction of the RF current flowing to the showerhead.
75. The present invention compensates the non-linear distortion of RF power amplifier in form of out of band compensating signal.
76. Above 2 years design experience in RF filter, inductor, diplexer , balun transformer, combiner, splitter, directional coupler and other similar devices.
77. Due to its excellent performance, the prescaler could be applied to many RF systems.
78. The passive IC's power supply is taken from the energy of the received RF electromagnetic field with the help of a Schottky diode rectifier.
79. Methods 16 RF patients bited by Bungarus multicintus were treated by mechanical ventilation plus antivenomous serum.
80. Purpose: High frequency amplifier applications, FM, RF , MIX , IF amplifier applications.
81. Digital ( and optical ) engineers must be aware of RF parameters in prod - uct development and production testing.
82. RF predistortion is the main power amplifier linearization technique used for wideband repeater at present.
83. Methods To make a special treatment and redetermination for the serum specimen of 55, the RF of which were directly detected with latex particle enhanced immunoturbidimetric assay unsuccessfully .
84. The stress sensor and RF emitter is installed in car tire, it is transmited for receiver installed in car by wireless after gas stress data gathered is processed.
85. We studied the relationship between the RF power, the chamber pressure and the film stress for deposited the silicon nitride film by Plasma Enhance Chemical Vapor Deposition(PECVD).
86. Si rich SiO 2 films have been prepared by a rf magnetron sputter method.
87. With coherent detection, radio frequency (RF) signal can be recovered with simultaneously suppressed second-order distortion and third-order intermodulation.
88. And then, this paper provided the simulation experiment of this condition. The importance of frequency stabilization of RF...
89. Applications include 100 KHz adjacent channel DX, and superior IMD immunity in very high RF areas.
90. Employing a bigrid EFT, the modulator circuit in the rf head is designed for rf level control.
12345678910