adhesiveness造句
1. Hardness, adhesiveness and gumminess of two type flour can be reduced with blending of waxy flour but springiness and resilience can be increased from the curve of TPA of cooking noodle.
2. It is shown that medium causticity, adhesiveness, temperature and pressure are factors of safety valve lapse and safety valve inspection time based on the analysis the reasons of safety valve lapse.
3. These assist in the breakdown of the intercellular adhesiveness of the cells of the stratum corneum, thus facilitating desquamation. Keratolytic products include.
4. The dipping dryness temperature effects noteworthily the adhesiveness with substance and the uniformity of film formed on the electrode.
5. Adhesiveness test: Test the adhesiveness of the ink, and guarantee the durability of print outs.
6. I announce adhesiveness, I say it shall be limitless, unloosen'd.
7. The antiseptic materials must have strong adhesiveness, good corrosion resistance and good viscosity resistance.
8. The open gear grease composition has outstanding water resistance, adhesiveness and antiwear and extreme pressure property.
9. The impact test, the thermal shock test and the scanning electron microscopy were used to investigate the effect of rare earth oxide on the adhesiveness between the glass coating and the base metal.
10. The quality of galvanized products relies mainly on the adhesiveness of zinc coat.
11. Addition of calcium and magnesium ions to soymilk resulted in limited decrement of clotting time, increment of coagulum strengthness and fall of adhesiveness of soymilk coagulum.
12. Three kinds of asphalts, one in the original and two others modified by antistripping or chemical agents, are examined by assessment of the adhesiveness and residual performance.
13. The invention provides an aqueous emulsion of ethylene-vinyl ester copolymer with excellent adhesiveness to mortar.
14. The higher water content in formulations made dough with the lower hardness, adhesiveness, springiness, cohesiveness, chewiness, gumminess and resilience in texture profile analysis.
15. Using self - prepared sodium naphthaline solution, PTFE micropore membrane was modified to improve its wetness and adhesiveness.
16. It has the good performances of water-proof, weather-proof, uvioresistant, heat resistant, good adhesiveness, etc.
17. Using butyl rubber as the base material, tackifier and some auxiliary additives, the butyl rubber based hot-melt adhesive was prepared for favorable adhesiveness with PP, PC and metals.
18. Desd - foldcharacteristics, non - polluting, pinhole for pelling off, uniformly thickness and width , adequate adequate adhesiveness along its full length, and high durability.
19. This adhesive has such advantages as low resistance, stable performance and good adhesiveness.