快好知 kuaihz


waveguide造句
61 Two factors, atmospheric waveguide and atmospheric noise, which have influence to the communication performance are pointed out in this paper. 62 As is well known, the EM field of TE11 mode at the wall of the circular waveguide changes as sine (or cosine) function azimuthally. 63 Impedance matching between waveguide and slow-wave structure is significant for performances of travelling wave tube. 64 The design requirement of TRL calibration kit is discussed in this paper. The dimensions of the calibration kit for double ridge waveguide were designed according to calibration theory. 65 Folded waveguide TWTs have extreme good developing future in shortcentimeter wave and millimeter wave band. 66 Through the analysis of this waveguide mode, single-mode ridge waveguide was designed and a new device structure was proposed. 67 A number of waveguide coupling windows are analyzed by using the present method and the satisfactory results are achieved by comparisons with ones given in some published literatures. 68 At the first, longitudinal slot on the broad face is selected as an element of slotted waveguide array. 69 The mode characteristics of single-mode optical fiber and ridge waveguide are analyzed based on the coupled mode theory. 70 The radiation and coupling of linear antennas in a rectangular waveguide are discussed by means of dyadic Green's function, field transformation and reaction concept. 71 Further analysis reveals that a complicated waveguide coupling effect is responsible for the enhanced transmission. 72 By concise mathematical explanations and experimental results, a new structure of latching ferrite rectangular waveguide phase shifter is first introduced in this paper. 73 In high power microwave producer, the microwave tube often has used the over-mode waveguide in order to enhance the power capacity and the efficiency. 74 The problem of spatial solitons in nonlinear graded-index planar dielectric waveguide is investigated. 75 Low orientation precision and poor universality of traditional fixture is the choke point of large-scale production of waveguide rotary joint manufacturing. 76 On the basis of the study on polymeric slab optical waveguide, a novel single moded polymeric converse ridge waveguide was designed and fabricated. 77 Analysis and design of solid-state power synthesizing system based on the slotted waveguide are introduced and the specific simulated data is given. 78 The suggested design procedure is implemented for symmetrical waveguide filters with cross couplings in the E - plane. 79 Computed results of anisotropic microstrip line and rectangular dielectric waveguide agree well with data given in the literature, the effectiveness of this method is thus justified. 80 By the aid of the phase shift-frequency characteristic, the conformal transformation and the perturbation theory, a new kind of compact, broadband waveguide phase shifter is developed. 81 The flow sensor has a structure of cantilever beam with ridge waveguide. 82 The approximate formulae and characteristics curves can be provided as reference of design and preparation of polymeric electro-optics waveguide and its device. 83 An antenna element constituting a part of an opening cross section structure of a double cylinder ridge waveguide is spread on a plane. 84 In this paper, the general formulas of probe antenna radiation in an elliptic waveguide are given by means of dyadic Green's function and field transformation methods. 85 After the currents on the wall of waveguideradiation pattern of omnidirectional waveguide slot antenna is com. 86 WWII secret X - radar used brass bed frame tubing as waveguide. 87 Under light irradiation, especially, Amorphous chalcogenide semiconductor have many photo-induced effects which are applied widely in many major, including optical waveguide, optoelectr. 88 The eigenmode of a hollow waveguide with two curved surfaces was analyzed with Helmholtz equation and the transmitting efficiency of the hollow waveguide was analyzed with a ray optics approach. 89 The performance of the optical splitter has verified the effectiveness of the proposed Y-branch architecture and the successfulness of the field-assisted ion-exchange glass waveguide technique. 90 A circular groove to circular waveguide junction is analyzed with finite element method (FEM).