meshing造句
(1) The car's gears aren't meshing properly.
(2) Meshing the research and marketing operations will be Mr. Furlaud's job.
(3) While practical issues of meshing motherhood with modern life loom large, the greatest challenges are still psychological.
(4) Meshing Celtic folk with punk, the Pogues' music is sweet, strong and exciting.
(5) Meshing analysis of face gear has two parts.
(6) Worn gear wheel and deep meshing of gears.
(7) Meshing spur gears must have the same diametral pitch.
(8) On radiosity meshing Parameters, enabled Global Subdivision Settings.
(9) Meshing gears must have the same pressure angles.
(10) Based on the pitch meshing theory of the worm drive, a new structure of the cylinder worm drive-the double pitch point and double side-placed worm gear drive is proposed in this paper.
(11) With the steering gear meshing steering rack level arrangement, the both sides with change the steering knuckle tie rod through a ball place to be connected.
(12) The real-time meshing stiffness of arced planet gear and the meshing stiffness of involute planet gear have mainly been analyzed.
(13) However, the chordal action and the meshing impact effect of roller chain drive damage the synchronization and uniformity of transmission.
(14) By combining the meshing principle with the actual working condition between the sprocket wheel and the pallet cars, the basic tooth profile curve was obtained.
(15) The processing of gear hob used the meshing straight teeth and helical cylindrical gears of cutting tools.
(16) Analysis shows that the distribution of meshing points is a function of the axial circular pitch, the axial space of two meshing points on a tooth and the effective width of the gear.
(17) While apply the technique of meshing clearance to the back push type sabot and front push type sabot, we have provided a transient dynamic analysis of this method using ANSYS.
(18) Gears using two gear teeth meshing with each other to transmit power and motion of the mechanical transmission, with the main, driven wheel gear direct, transmit motion and power of the device.
(19) Based on the meshing and geometry relationship between the profiles.
(20) It'should be said GALLUS machine meshing gear teeth, there was a small staves of opportunities.
(21) In addition, the meshing of two convex teeth make the relative radius of curvature of the contacting point shorter.
(22) Based on meshing theory, a formula is derived for calculating index error of worm-type cam follower(i. e. Tindex plate)under influence of actual worm-type cam profile and dimensions.
(23) There is something wrong with this machine, the wheels aren't meshing properly with each other.
(24) This paper introduces some methods of how to adjust bearing preload, meshing prints and gear backlash of the Main Reducer in driving axle assembling.
(25) If helix angle is equal to or slightly smaller than the angle which makes two meshing boundary lines coincide with each other, preferable meshing performance is obtained.
(26) To enhance the bearing capacity of NGW gear drive, the optimal design has carried on the outside meshing gear drive dislodgement parameter.
(27) From the point of view of the contact line and the meshing limit line, the contact performance of double enveloping TI (Torioidal Involute) worm gearing is analysed.
(28) Diverter: By the wheel, the wheel steering axle, changes meshing to pay ( diverter ) to be composed.
(29) The movable teeth transmission can turns a gear wheel into multi - teeth meshing transmission which radial sports.
(30) Then the formulae for calculating machine tool adjustment parameters on hobbing are derived by the study of spatial meshing principle among hobbing cutter, imaginary generating rack and gear.
1234