camshaft造句
31. The value - opening mechanism includes a valve lifter and a cam on a camshaft.
32. In the engine, oil is supplied to crankshaft and camshaft journals rotating in their supporting bearings.
33. The opening of each valve is controlled by a camshaft.
34. These engines are known as dual overhead camshaft ( DOHC ) engines.
35. A dynamics model for valve gear of overhead camshaft engine is presented in this paper.
36. Chilled cast iron camshaft has less production procedure and energy consumption and lower costs.
37. The production process of chilled cast iron camshaft made by Citroen Automobile Co. was introduced. The comparison between domestic and foreign camshaft production status was made.
38. Argon arc remelting hardening is a new technology of manufacturing camshaft.
39. The influence of inoculant addition amount on the structure and properties of camshaft was investigated.
40. The camshaft and crankshaft gears can be connected directly, or meshed.
41. This article analyzes the defect of the camshaft quenching machine, brings forward the effective design plan.
42. Angular velocity grinding and linear velocity grinding are the main grinding method for camshaft.
43. The camshaft position sensor is located in the distributor on all engines.
44. The MLX90217 is a self adjusting digital output rotary position gear tooth sensor designed for use in automotive camshaft sensing as well as other speed sensing applications.
45. As camshaft rotates, the lobe, or high spot of the cam, pushes of the valve.
46. If chain is not satisfactory, remove camshaft sprocket attaching bolt and remove timing chain with crankshaft and camshaft sprockets .
46. Wish you can benefit fromand make progress everyday!
47. Two TDC ( Top Dead Center ) sensors are mounted at the rear of the single camshaft.
48. A new method is proposed to determine the excited torque and bearing load of the injection pump camshaft by means of measuring the longitudinal strain in the bottom part of the plunger.
49. Molded part 2 by elbow Festival, the camshaft or put pressure on double-toggle System.
50. Camshaft out of time.
51. The main products are as follows, exhaust manifold, bent axle, camshaft, rubbing sassafras nestification, gearbox, support, flywheel, etc.
52. A sort of chilled nodular iron camshaft was developed by adopting resin - coated sand shell casting process.
53. Abstrct:It has been introduced that structural character, main parameters and design and manufacture of shell molding camshaft die.
12