servo造句
1. This driving wheel engages with that servo wheel and turns it.
2. Fig 1. Block diagram of a typical servo system.
3. The pilot merges into the servo mechanism.
4. Receiver is attached to battery with servo tape - rubber bands are for added security.
5. The consecutive turntable is a position tracking servo system.
6. The control mechanism may be a servo control mechanism.
7. Servo Laminator position setup, high precise position and conveying.
8. Servo motor (6) dresses grinding wheel by feed-in.
9. Hydraulic brakes and servo assisted brake system.
10. This paper introduces the development of the servo control electronic yarn feed system and analyzes the warp knitting machine's let-off feedback deflection and the.
11. A servo potentiometer that generates the signal for comparison with the input signal.
12. Servo motor drives the whole wheel head sliding board (Z1, Z2 axis) doing longitudinal running through ball screw.
13. CNC billet aluminum bell cranks transfer servo motion to the swashplate.
14. Optimized servo positioning lowers the CG and turns the arm and linkage inboard to eliminate impact damage.
15. These are driven direct by gears on the radio-controlled servo output spindles.
16. This is inserted between the receiver and the tail rotor servo.
17. Both the transmission controls are heavy, and the all-disc brakes need a hefty shove despite their servo.
18. Fig 3. Complete circuit diagram for the 8-channel Digital Servo Interface.
19. In radio control parlance this is called the frame rate and determines how rapidly and smoothly the servo position can be updated.
20. The inputs of fuzzy controller are the error of slip ratio and its change ratio, the output of fuzzy controller is the control current of the servo valve.
21. A multiple interrupt system was used in the modular CNC system to realize linear servo control and position servo control to complete the automatic turning of the non-circular parts.
22. A dynamical - integral sliding mode control approach was proposed for the speed controlling of AC servo system.
23. In this paper, the mathematical models of open loop system and feedback closed-loop system of a micro feed servo system using magnet are studied.
24. Therefore, it is urgent and significant to study the self-tuning strategy of AC servo system control parameters to improve the efficiency and performance of servo systems.
25. Simulation and experiment results show that this method could improve the stability and antidisturbance ability of rocket launcher position servo system effectively.
26. Braking system can be divided into human and braking systems, brake systems and power brake servo systems.
27. Theory analysis and the result of simulations show that the scheme possess simultaneously both good behavior of servo tracking and stochastic regulation in adaptive control system of our design.
28. In the subject, permanent magnet linear synchronous motor ( PMLSM ) servo system is a researched object.
29. So the scale gene self - tuning two - dimensional fuzzy controller is applied to optoelectronic tracking servo system.
30. It is available to improve optical storage density by using short wavelength laser, but a harder focusing servo system is need.
12345678910