stator造句
1. The number of stator teeth is restricted by the numbers of phases and rotor teeth.
2. Stator coil found burnt and to be rewound.
3. Generator, electric motor stator Coil temperature survey .
4. During the measurement of welding contraction distortion for stator in a large hydropower station, the method is used well.
5. The air gap between rotor and stator shall not exceed OEM specifications.
6. Due to stator resistance and armature reaction, the output voltage of conventional permanent magnet synchronous generator varies with the load.
7. The abnormal rising temperature of the stator slots was due to scaling substance blocking hollow copper conducting wire.
8. Offsctdruckereien the nbspvacuum printer is the stator and rotor and vane.
9. And the affection of cooling air quantity to stator thermal field is analyzed.
10. Dielectric dissipation parameters and partial discharge parameters of stator bars with different operating years in large generator were studied in this paper.
11. Using the finite element method software ANSYS, the stator temperature field of the hydroelectric generator is analyzed and calculated, the corresponding temperature field picture is given.
12. The effect of the stator magnetic saturation due to variation of the rotor position is considered by the scheme. Using estimated velocity of rotor corrects the rotor position.
13. Meanwhile, a stator slot wedge 70 is arranged in the non ferromagnetic material slot 90 opening to fix the stator coil 60, air gap is provided between the stator core 40 and the stator core 10.
14. Phase current in motor stator is precisely detected by current detection circuit.
15. In order to ensure equality of the air gap between rotor and stator, we used oblique iron core frame.
16. The presented phase angle PWM method is centering attention on motor stator voltage space vector and controls the vector angle to vary linearly and so reduces higher harmonics in voltage wave.
17. Elements similar to those of ordinary motor, including the stator, rotor, armature winding, brush and other components, but very compact structure.
19. An inductor alternator is a special kind of synchronous generator in which Both the field and the output winding are on the stator.
20. But its low speed range is easy affected by the stator voltage error, especially when the motor is connected to the voltage inverter.
21. The results indicated that the steady-state performance of dry gas seal was influenced unusually by roughness and static stator misalignment.
22. A new type of disk piezoelectric micromotor was given, which is non-contact between the stator and rotor.
23. The paper gives the calculated reactive compensation power and stator frequency with respect to purely resistive load and purely inductive load under constant voltage operating condition.
24. The invented generator comprises rotor on shaft fixed in body case as a rotatable bearing, and stator (8).
25. In thermal state monitoring of generators, the temperature model parameters need to be determined firstly in order to obtain the standard temperature value of generator stator end region (SER).
26. There are power winding and control winding with different pole numbers and frequencies on the stator of doubly fed brushless machines.
27. A linear permanent magnet brushless DC motor ( LPMBDCM ) composed of an armature and stator was introduced.
28. Since the rotor is fed by a invertor, the waveform supplying the stator can be affected.
29. While the characteristic of the control chip TMS320F240DSP, the sensors for stator current and rotor speed detecting and the corresponding data interface processing were also presented.
30. Theoretical analysis and simulations indicate that energy is saved while the stator current minimizes by adjusting excitation current according to the loaded state.
123456