slenderness造句1 He knew the slenderness of my wallet.
2 We try to combine slenderness with strength.
3 The resista nce decreases intensely when the slenderness ratio of the hot molding sand layer increases.
4 Meanwhile the effects of slenderness ratio and load eccentricity on the ultimate load-capacity of slender composite columns are numerically analyzed and discussed in detail.
5 Test results show that not only the slenderness ratio and eccentricity ratio affect the load-carrying capacity of columns, but also the end moments as well.
6 It is confirmed that both rise-to-span ratio and slenderness ratio influence the elastic buckling load.
7 The limiting slenderness of T-section stems prescribed in the Code for Design of Steel Structures (GBJ17-88) is too restrictive so as to hinder the promotion of using the hot-rolled cut T-section.
8 The slenderness of the chances that anything would be done.
9 As the twentieth century got under way,[www.] other cultural changes made slenderness seem desirable.
10 Its ads, coupled with diet industry ads and media images that promote slenderness, are a recipe for bulimia.
11 Also analyzed are the influences of CFRP ratio, angle steel ratio, slenderness ratio and eccentricity to the mechanical properties of the columns.
12 It is shown that the nonlinear frequency ratio increases with the vibration amplitude and the slenderness ratio.
13 Some kinds of Newtons theory of collision methods is extended to calculate the supersonic and hypersonic missiles with large slenderness ratio.
14 MYRA: Oh, not quite, that'd be dreadful. We try to combine slenderness with strength.
15 Moreover, the influence of initial crookedness would be reduced as slenderness ratio and bending moment are increased.
16 The bearing capacity and the ductility of a FRP-confined concrete column decrease with the increase of slenderness ratio.
17 A total of 22 four-tube Concrete Filled Steel Tubular(CFST)laced columns are tested, with the experimental parameters being slenderness ratio and eccentricity .
18 It was found that, in general, ascending time ratio, fire load ratio, cross-section dimension and slenderness ratio have a significant influence on residual strength.
19 Eccentrically loaded concrete filled steel tubular(CFST) laced columns were tested with slenderness ratio as main experimental parameter.
20 The structure of single-walled carbon nanotubes used as the ideal model is composed of a half conductor cylinder and hemisphere shell that has long slenderness ratio.
21 Cable-stayed bridge is a new type of bridge structure which has been developed in recent decades and enjoys the characteristics of concinnity, slenderness and strong span ability.
22 After analyzing the response of SRC column with different durations, slenderness ratios or eccentricities , the equations of ultimate strength are derived by regression.
23 The flexural buckling and flexural-torsional buckling modes of a monosymmetric section column are presented and the equivalent slenderness ratio for flexural-torsional buckling is derived.
24 With Newton-Raphson and arc-length calculation method, this paper has made research on effect of tapering ratio, web plate width-thickness ratio and slenderness ratio on ultimate bearing capacity.
25 Test results indicate that the ultimate load carrying capability of the CFST laced columns compressed eccentrically reduces with the increase of slenderness ratio.