plating造句
61. The flow, the components of plating liquid and the parameters of master working procedures for renovating gears by shot-peening and brush-plating were detailedly presented.
62. Ni - P coat can be formed by means of various technologies including electroplating and chemical plating.
63. The adhesion of color passivate films being poor is one common trouble kali salt zinc plating.
64. Cholride ions in acid copper plating bath were determined by nephelometry with OP emulsifier as stabilizer.
65. In order to obtain stable brush plating solution and good galvanization performance, various ligands are added.
66. The paper has made a study with laboratory method on the effect of chemical plating of Ni on the thermal fatigue property of cast iron.
67. Rhodium in rhodium plating bath was determined by spectrophotometry with sodium hypochlorite as chromogenic agent.
68. Aqueous solution plating and metallurgy composite were main methods of preparing platinum composite electrode at present.
69. The optimal process conditions of electroless lead plating on the surface of polyacrylonitrile fiber matrix are studied.
70. Are plating distributions performed each plating tank on a monthly basis?
71. Within the field of fiber, paper making, plastic and metal plating, one of the key techniques to guarantee the product quality is the control of winding tension of linear, strip and area materials.
72. After oxidation treatment, the flake graphite powders were electrolessly copper plated followed by electroless silver plating.
73. The development history of trivalent chromium passivation for zinc plating was overviewed.
74. The influence factor on low - phosphorous electroless nickel plating is studied.
75. The mechanical zinc plating of low carbon steel by high energy ball milling was studied.
76. Among the modified coatings, electroless plating tin has attracted a wide range of attention because of stable solution, simple operation and better solderability.
77. Finish: Electric galvanizing, hot - dip zinc plating, stainless steel or PVC coated.
78. Acid electroless nickel phosphorus plating on PZT ceramic was studied with hypophosphite as a reducing agent.
79. This article discuss the cause and control about treeing of PTFE gold plating board.
80. Hao Ge a tie down, the sun plating over genuine friendshellop.
81. Methods 28 patients with tibiofibular fractures were treated with indirect reduction and LC DCP plating through the tunnel inside tibia.
82. Five essential causes resulting the abnormal phenomena in alloy plating such as anomalous codeposition and induced codeposition are explained in detail.
83. Metals suitable for electroless metal plating on fabrics are copper and nickel.
84. Successful tests on the silver plating on hard aluminium, pure aluminium and rust-proof aluminium alloy, are made and the mass production is finally carried out.
85. The characteristics and two types of additives of zincate zinc plating were introduced briefly.
86. The composition, binding power, electrical resistivity and corrosion resistance of plating were analysed.
87. Main Uses: Mainly used in plating, It can be the positiveactivant for the "fast nickel-plate ".
88. Traditional hard chromium plating technology does harm to environment, and the deposit has performance defects.
89. The cerium salt conversion film were formed on zinc plating coating by immersion treatment.
90. In the thesis, a new nanostructured silicon template is reported, and hiring it as template, nanostructured noble metal thin films are obtained through immersion plating method.
123456