loopback造句
1. Press'start Test'button to run loopback test.
2. Hence, the loopback interface 127.0.0.1, but it could just as easily be running on a remote system.
3. The initrd image is a loopback filesystem image which contains our mini-root filesystem (this image can optionally compressed with gzip to reduce its size).
4. If your loopback test fails, then it means IP stack is not answering.
5. Whether multicast traffic can be received on the loopback interface, or whether the multicast transmitters are using the same NIC on which the data is being received.
6. Additional features with the SP505 include internal loopback that can be initiated in either single-ended or differential modes.
7. While in loopback mode, driver outputs are internally connected to receiver inputs creating an internal signal path convenient for diagnostic testing.
8. For instance, using FUSE, a user can mount an sshfs (secure shell) filesystem or a loopback filesystem (see Resources).
9. The new addressing scheme, defined in RFC2373 (see Resources), provides a colon-separated format, where 0:0:0:0:0:0:0:1 is the loopback address equivalent to 127.0.0.1.
10. Like cramfs, you can use SquashFS on a standard Linux system with mksquashfs and the loopback device.
11. Consider the challenge of creating a Linux bootable CD-ROM, which consists of a boot loader, an initrd, a kernel,(Sentence dictionary) and a loopback filesystem sitting on the CD.
12. The auto-netsh.sh script tunes some kernel networking parameters, configures the loopback interface, and starts up a DHCP client.
13. One peculiarity is that HTTP connection data is not accumulated for services in loopback mode.
14. The illustration shows that the broker is running on the same machine as the client application since the local loopback address is used.
15. Many LiveCDs use a compressed filesystem image that often comes with the cloop compressed loopback driver to effectively double the storage capacity.
16. You can play with cramfs using the mkcramfs utility and the loopback device.
17. The following examples use a couple of flags on the interface to retrieve its current state and check for loopback.
18. The rest of the packages are not installed into the zone and are accessible with a loopback file system (lofs) in read-only mode.
19. You can connect to that port only if your client application is running on the same machine and is connecting through the loopback address (localhost or 127.0.0.1).
20. Apply workarounds to any known limitations, such as the loopback occurrence mentioned above.
21. linuxrc's primary task is to get the CD mounted so that the loopback filesystem can itself be mounted and accessed.
22. After you have done steps 1-7 for all computers, the /etc/hosts tab of LinuxConf should list one entry for every computer in your LAN, in addition to the local host's loopback interface.