recrystallization造句
1. After tempering, structure inheritance reduces, the recrystallization temperature reduces.
2. Measuring static austenitic recrystallization by Back extrapolation method.
3. Trace lithium can improve recrystallization temperature of pure copper.
4. The recrystallization temperature and time are the main factors.
5. The course of recrystallization is speeded up with increasing the velocity of strain at a constant total distortion.
6. Recrystallization is the necessary condition for spheroidization of the deformed texture.
7. The refined wax through recrystallization leads to white crystalline wax.
8. It is evident that the effects of strain-induced recrystallization on grain refining and on high-angle grain boundary fraction increasing affect greatly the superplastic properties of the alloy.
9. The recrystallization that widely occurred in mylonite is a softening process.
10. The late stage is characterized by recrystallization in a stable enviroument. The metamorphism of low pressure type of low amphibolite facies only occurs on the main boundary planes of the zone.
11. The austenite recrystallization in every pass has been studied theoretically by computer modeling and experimentally on the bar mill at Tanggang. The calculated results agree with the measured values.
12. The lower the recrystallization temperature, the smaller is the grain size.
13. Furthermore, we discovered the recrystallization solvent for separation of the diastereomer.
14. During hot-working process, dynamic recovery and dynamic recrystallization occur in the microstructure.
15. Three recrystallization processes were studied by investigation the influence of pH of solution, recrystallization temperature, times of recrystallization on the purity and yield of sebacic acid.
16. The granulation mechanism of undercooled granular grains is owing to the dendrite breaking - up and recrystallization.
17. In addition, dynamically recrystallized grain size of friction stirred 5052 alloy is a key, significant microstructural refinement caused by the phenomenon of dynamic recrystallization.
18. Experimental results indicate that the sample undergoes a process of continuous melting and recrystallization during DSC scanning.
19. Micronization of irbesartan (IBS) has been studied using an anti-solvent recrystallization method.
20. Furthermore, both the effect of martensite lath boundaries on the nucleation of dynamic recrystallization, and the mechanism of nucleation and growth of equiaxial nanometer grains were revealed.
21. The coarse crystalline LC4 alloy exhibit some superplasticity under lower temperature and higher strain rate, because it can create effective recrystallization refinement.
22. The purified rice amylose and amylopectins were obtained by n - butanol recrystallization method.
23. It is reveal by GC analysis that the purity of the TMP , treated by reduced pressure distillation and recrystallization in acetic ester , approximates to that of the reagent grade TMP .
24. The growth velocity for recrystallized grain is proportional to the driving force of recrystallization, which is determined by the grain boundary energy and dislocation density.
25. The variation of volume fractions for static and dynamic recrystallization, and austenite grain size during rolling process are obtained by model calculation.
26. The effect of damage and fault healing has the great influence on the plasticity in materials over the recrystallization temperature.
27. Early ductile deformation is characterized by dislocation glide , twinning displacement and recrystallization, forming schist and mylonite.
28. Using the difference of the hydrolysis speed in the water between meso-lactide and other lactides, high pure L-lactide was obtained by water washing-four times recrystallization.
29. The addition of RE oxide can significantly increased the recrystallization temperature and anti-sag properties of molybdenum.
30. The temperature of solid solution treatment affected not only the degree of the second phase dissolved in the matrix alloy, but also the recovery and recrystallization processing level of the alloy.
123